Hộp điều khiển van Furness Controls FCS539 (thử nghiệm van chuyển đổi)

Các tính năng nổi trội:

Các kênh chuyên dụng để kiểm tra rò rỉ cổng vào, xác nhận áp suất cổng ra và kích hoạt van điều khiển

Cảm biến van tích hợp cho mục đích xác minh thử nghiệm

Kiểm tra đường dốc điều khiển để đảm bảo áp suất và thời gian có thể đo được là chấp nhận được

The FCS539 contains all the required pneumatics to interface FCO750 Leak Detectors with the ports of changeover valves, allowing efficient automatic testing of these parts.

The FCS539 is controlled by the FCO750’s programmable outputs, driving the required pneumatic / electrical pilots required to control specified pneumatic and solenoid valves on a test by test basis. The respective electrical input signals of the FCO750 ensure internal valves within the FCS539 are in the correct state via the use of optical sensors.

An integral gauge pressure switch within the FCS539 verifys the outlet air is either on or off at the expected stage of test. If it is not as expected, a failure is indicated to the operator, much like any other potential defect such as; excessive pressure loss to atmosphere, leaks to adjacent ports or ramp test fail scenarios. Testing of changeover valves requires pressure decay testing at three different pressures, which is achieved using an automatic pressure regulator. Vacuum can also be applied if required.

The FCS539, provides you with a multifunction Leak Detection system which suits a wide variety of valve configurations and styles. It not only improves the quality and consistency of testing but also allows an increase in production speed.

The optional barcode reading function on the FCO75x series of machines also allows you to trace batch ID, operator ID, product ID and serial number data points.