Máy phân tích công suất Hioki 3169-20 | EMIN.VN

Product image

Máy phân tích công suất Hioki 3169-20

Hãng sản xuấtHIOKI

Model3169-20

Liên hệ

Số lượng

Thanh toán an toàn

Hỗ trợ chuyên nghiệp

Đổi trả dễ dàng

Giao hàng tận nơi

THÔNG SỐ KỸ THUẬT

- Kiểu đo lường:

+ 1-phase 2-dây, 1-phase 3-dây

+ 3-phase 3-dây, 3phase 4-dây

+ 4 kênh đo điện áp, 4 kênh đo dòng điện

- Các nhóm đo lường:

+ Điện áp, dòng điện, công suất hữu công/vô công/biểu kiến

+ Công suất hữu công/ kWh

+ Hệ số công suất, tần số, dạng sóng hài

- Thang đo:

+ 150~600V, 3 thang đo

+ 500mA ~ 5kA AC

+ Phạm vi đo công suất: 75W~900kW

- Độ chính xác:

+ Điện áp AC: ±0.2 % rdg. ±0.1 % f.s.

+ Dòng điện AC: ±0.2 % rdg. ±0.1 % f.s

+ Active power: ±0.2 % rdg. ±0.1 % f.s

- Khoảng thời gian lưu dữ liệu: 1~30s, 1~60min, 13 lựa chọn

- Chức năng khác:

+ Kiểm tra lỗi kết nối, lựa chọn ngôn ngữ, hiển thị giữ số liệu

+ Thiết lập sao lưu, tắt nguồn tiết kiệm điện, khóa phím

- Giao tiếp thiết bị bên ngoài:

+ RS-232C

- Nguồn: 100 to 240 V AC, 50/60 Hz, 30 VA max

- Khối lượng sản phẩm: 1.2 kg

- Kích thức sản phẩm: 210*160*60mm

- Phụ kiện đi kèm:

+ Dây đo điện áp L9438-53 ×1 (Black/ Red/ Yellow/ Blue)

+ Dây nguồn ×1,

+ hướng dẫn sử dụng

+ CD-R ×1 (RS-232C interface operating manual) ×1

+Nhãn đánh đấu dây ×1

- Bảo hành: 12 tháng

Measurement line & number of circuits	Single-phase 2-wires (4 circuits), Single-phase 3-wires (2 circuits), Three-phases 3-wires (2 or 1 circuit), and Three-phases 4-wires (1 circuit) Note: 50 or 60 Hz, and that share the same voltage line
Measurement items	Voltage, Current, Active/ reactive/ apparent power, Active/ reactive power integration, Power factor, Frequency, Harmonic waveform value (up to 40th order)
Voltage ranges	150.00 V to 600.00 V AC, 3 ranges
Current ranges	500.00 mA to 5.0000 kA AC (depends on current sensor in use)
Power ranges	75.000 W to 900.00 kW (depends on combination of voltage, current range, and measurement line)
Basic accuracy	AC Voltage: ±0.2 % rdg. ±0.1 % f.s. AC Current: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy Active power: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy (at power factor = 1) CLAMP ON SENSOR 9661: ±0.3 % rdg. ±0.01 % f.s. (different from each model)
Measurement method	Digital sampling, PLL synchronization or 50/60 Hz fixed clock
Basic accuracy	Active power: ±0.2% rdg. ±0.1% f.s. + clamp-on sensor accuracy (at 45 to 66 Hz)
Display refresh rate	2 times /sec (except when using a PC card while accessing the internal memory, or when performing RS-232C communications)
Data save interval	Standard interval: 1 sec to 30 sec, 1 minute to 60 minutes, 13 selects Fast interval: A single waveform, or 0.1, 0.2, or 0.5 sec (at instant value only)
Frequency characterristics	Fundamental waveforms up to the 50th order ±3% f.s. + measurement accuracy (of a 45 to 66 Hz fundamental waveform)
Other functions	Error connect check, language selection, display hold, setting backup, power shut off management, key lock, [3169-21 only] D/A output 4 channels, ±5 V DC f.s.)
Power supply	100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions, mass	210 mm (8.27 in) W × 160 mm (6.30 in) H × 60 mm (2.36 in) D, 1.2 kg (42.3 oz)
Supplied accessories	VOLTAGE CORD L9438-53 ×1 (Black/ Red/ Yellow/ Blue), Power cord ×1, Instruction Manual ×1, Quick Start Manual ×1, CD-R ×1 (RS-232C interface operating manual) ×1, Input cord label ×1, CONNECTION CABLE 9441 ×1 (for the 3169-21 only)

OPTION

				Voltage measurement

VOLTAGE CORD L9438-53

	Bundled with standard, Black/ Red/ Yellow/ Blue, 3m (9.84ft) length, Alligator clip ×4

MAGNETIC ADAPTER 9804-01

	Attaches to the tip of the Voltage Cord, Red ×1

MAGNETIC ADAPTER 9804-02

	Attaches to the tip of the Voltage Cord, Black ×1

				Current measurement

For power or load current measurement (1 sensor necessary for single-phase measurements, and 2 or 3 sensors required for 3-phase measurements)

CLAMP ON SENSOR 9694

	5A AC rated current, φ 15 mm (0.59 in), 3 m (9.84 ft) length

	Details

CLAMP ON SENSOR 9660

	100A AC rated current, φ 15 mm (0.59 in), 3 m (9.84 ft) length

	Details

CLAMP ON SENSOR 9661

	500A AC rated current, φ 46 mm (1.81 in), 3 m (9.84 ft) length

	Details

FLEXIBLE CLAMP ON SENSOR CT9667

	5000/500 A AC rated current, φ 254 mm (10 in), Cable length: Between sensor - box 2 m (6.56 ft), Output cable 1 m (3.28 ft)

	Details

CLAMP ON SENSOR 9669

	1000A AC rated current, φ 55 mm (2.17 in), 3 m (9.84 ft) length

	Details

CLAMP ON SENSOR 9695-02

	50A AC rated current, φ15mm(0.59in), Requires the Connection Cord 9219

CLAMP ON SENSOR 9695-03

	100A AC rated current, φ15mm(0.59in), Requires the Connection Cord 9219

CONNECTION CORD 9219

	Connect with the 9695-02/ -03, Output BNC terminal

For clamp sensor adapter

CLAMP ON ADAPTER 9290-10

	CT for 1000A AC, secondary current 1/10 of primary

	Details

DOWNLOAD CATALOG


	3169-20, 3169-21 product catalog.pdf (1.41 MB) (2012-09-06 updated)