Máy đo điện trở thấp DC Hopetech CHT3540-2 (10μΩ~300kΩ, 0.05%)
Hãng sản xuất: Hopetech Model: CHT3540-2 - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0345.689.536
-Thông số: DC resistance
-Độ chính xác cơ bản: Điện trở: 0.05%
-Dải đo: Điện trở: 10μΩ~300kΩ
-Nguồn tín hiệu: dòng điện thử <1A, chế độ : điện cao
-Dải:
+ 300mΩ,3Ω,30Ω,300Ω,3KΩ,30KΩ,300KΩ
+Chế độ tự động và hướng dẫn
-Tốc độ đo: 3 meas/sec., 15 meas/sec., 60 meas/sec.
-Hiển thị kết quả: direct read, ΔABS,Δ%,sorting results
-Giá trị hiển thị Max.: 30,000 4 1/2 digit display
-Hiệu chuẩn: Short-circuit reset for all ranges; REL function
-Bộ so sánh: 30 sets of data records,NG-LO, GD-IN, NG-HI display and output. Beeper is adjustable.
- Chế độ trigger: Internal/manual
-Giao tiếp: RS-232C(Optional)
- Đầu nối thử: 4 ( 2 đầu dò và 2 đầu chuyển)
-Nguồn cung:
+Điện áp:198VAC~240VAC;
+Tần số: 47Hz~63Hz;
+Công suất: max 15VA
-Kích thước : 385 mm (L)x249mm (W)x102mm (D);
-Trọng lượng: 3.5kg
The CHT3540 is a high precision DC resistance meter with wide measurement range and controlled by high-performance microprocessor .It can be used to test resistance of 1μΩ~3MΩ, maximum display value is 30,000 counts. CHT3540 can reach accuracy of 0.05% and under its maximum measuring speed of 60 times/sec. In addition, the readings beating can be controlled within 3 counts or less. The special 3 current test modes (high current, low current and pulse current) and the standard temperature compensation function can be adapted to the tests of different requirements. It can be used to measure resistance of transformer, inductance winding, relay, switch, connector contact, lead, soldering point, PCB track and hole, metal detection, etc. The RS232C and HANDLER interfaces can be used to output GD/NG signal, to improve automatic measurement ability on production line. |
Model |
CHT3540-2 |
Measurement parameters |
DC resistance |
Basic accuracy |
0.05% |
Measurement range |
10μΩ~300kΩ |
Signal Source |
Test current:<1A;Current mode: high current |
Range |
7 different ranges-300mΩ,3Ω,30Ω,300Ω,3KΩ,30KΩ,300KΩ; Auto and manual modes are available in each range |
Measuring speed |
3 meas/sec., 15 meas/sec., 60 meas/sec. |
Result display |
Direct read, ΔABS,Δ%,sorting results |
Maximum display value |
30,000 4 1/2 digit display |
Calibration |
Short-circuit reset for all ranges; REL function |
Comparator |
30 sets of data records,NG-LO, GD-IN, NG-HI display and output. Beeper is adjustable. |
Trigger mode |
Internal/manual |
Interface |
RS-232C (Optional) |
Temperature compensation |
Optional |
Test terminal |
Four-terminal(including 2 detecting-ends and 2 driver-end ) |
Power supply |
Voltage:198VAC~240VAC; Frequency: 47Hz~63Hz;Power: max 15VA |
Dimension & weight |
385 mm (L)x249mm (W)x102mm (D); Weight: 3.5kg |
Accessories |
CHT9340 kelvin test wire |
Options |
CHT0301 4-terminal test fixture |
Others |
Four-color VFD display, keypad lock and data hold function |
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch