Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Thông số kĩ thuật:
In dữ liệu: Không có máy in
Tham số kiểm tra chính: HV
Tham số có thể chuyển đổi: HRA, HRB, HRC, HBW, HS, MPa
Phạm vi đo: 50~1599HV, 20~68HRC, 85~650HB, 41~100HRB
61~85.6HRA, 34.2~97.3HS, 255~2180MPa
Độ phân giải: 1HV, 0.1HRA, 0.1HRB, 0.1HRC, 1HB, 0.1HS, 1MPa
Độ chính xác: ±4%HV, ±4%HB, ±1.5HR
Phương pháp hiệu chỉnh:
Vật liệu bình thường: hiệu chỉnh một điểm
Vật liệu đặc biệt: hiệu chỉnh nhiều điểm
Nhiệt độ hoạt động: -10°C ~ 40°C
Nguồn điện: Pin lithium tích hợp có thể sạc lại (cho 10 giờ làm việc)
Kích thước thiết bị chính: 190×82×30mm
Kích thước đầu dò: 150xØ22mm
Trọng lượng: 540g
Cung cấp bao gồm
Máy chính: 1pc
Đầu dò thủ công 19.6N: 1pc
Máy in Bluetooth: -
Bộ sạc: 1pc
Cáp USB: 1pc
Khối chuẩn độ cứng ngẫu nhiên: 1pc
- Small size, light weight, portable, convenient for on-line measurement and can be used to measure large workpieces
- Support 360°measurement, fast test speed, the fastest results in 1 second
- Standard Vickers indentation, small test indentation and low damage to the workpiece
- 100 measurement data sets and 10 calibration data sets can be stored
- Large display, directly shows the current measured value, maximum value, minimum value, average value and unit conversion value
- For unspecified conversion tables and unknown materials, multi-point calibration on any hardness scale you can choose to eliminate of systematic errors due to conversion tables
- According to DIN 50159, ASTM A1038 standards
Applications:
1. Hardness measurement of flange edges and gearoot stampings, gears and gear grooves with hardened die sheet surfaces, taper sections
2. Hardness measurement of shafts and thin-walled pipes and vessels
3. Hardness measurement of thin plated layers, wheels, turbine rotors and welded parts
4. Measurement of the depth of a certain hole diameter deep holes, curvature of the larger dents and convex marks, irregular planes
5. Covering the majority of hardness measurement of industrial production of ferrous metals, non-ferrous metals and their alloys
Datasheet