ESCO CBI-H-2G8 封じ込めバリアアイソレーター (1.2 m)

Main Chamber Nominal Size (Width): 1.2 meters 

Working Chamber Dimensions - Min (W x D x H): 1.20 m x 0.55 m x 0.77 m 

Working Chamber Dimensions - Max (W x D x H): 1.20 m x 0.63 m x 0.84 m 

External Dimension (with one Pass Chamber) (W x D x H):  

With Adjustable Base Stand (Min): 1.82 m x 0.92 m x 2.55 m 

With Adjustable Base Stand (Max): 1.82 m x 0.92 m x 2.85 m 

External Dimension of Pass-through Chamber (W x D x H): 0.62 m x 0.66 m x 0.58 m 

Glove Port Height (Min): 1200 mm 

Glove Port Height (Max): 1500 mm 

Chamber Environment: ISO Class 5 all chambers (Grade A) 

Airflow: 

Class III: Turbulent 

Class I: Unidirectional (Positive) 

Pre-filter: 

Process Chamber: G4, polyester media 

Pass-through Chamber: G4, polyester media 

Filter Type - Chamber Inlet: HEPA (H14) Filter with Integral Mesh Guard and Gasket Seal 

Filter Efficiency - Chamber Inlet: 99.995% MPPS 

Filter Type - Chamber Exhaust - 1st Stage: HEPA (H14) Filter with Integral Mesh Guard and Gasket Seal 

Filter Type - Chamber Exhaust - 2nd Stage: HEPA (H14) Filter with Integral Mesh Guard and Gasket Seal or Carbon Filter 

Filter Efficiency - Chamber Exhaust - 1st Stage: 99.995% MPPS 

Filter Efficiency - Chamber Exhaust - 2nd Stage: 99.995% MPPS 

Lighting Level: ≥ 500 Lux (6000 K)  

Sound Level: ≤ 80 dBA 

Isolator Construction: 

Chamber: SS 316L 

Service Housing: SS 304 

Support Frame: SS 304 

Isolator Finish: 

Chamber Internal: ≤ 0.4 Ra 

Chamber External: ≤ 0.6 Ra 

Service Housing External: ≤ 0.6 Ra 

Support Frame: ≤ 1.0 Ra 

Electrical Requirements: 220-240 VAC, 50/60 Hz, 1Ø 

Compressed Air Requirement (by Client) If no on-board compressor: 2 Bar-g Pressure at 5 L/sec ✔ 

Exhaust Duct Requirements (by Client) unless Integral Catalytic Converter is Included: 10” Duct from Isolator to Outside 

Net Weight: TBD

Catalogue