Labstac WU132 エンドトキシンの排除超純水システム

Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)

Temperature: 5-45°C

Pressure: 1.0-4.0 Kgf/cm²

Flow Procedure**: PF+AC+RO+DI+UF+TF

Ion rejection rate: 96%-99% (New RO membrane)

Organic rejection rate: >99%,when MW>200 Dalton

Particles and bacteria rejection rate: >99%

Bacteria: <0.1 cfu/ml

Output(25°C)****: 30 L/hrs

Pure water outlet: RO water and Ultrapure water

Water Quality Monitor: Portable TDS/conductivity test pen + on-line resistivity monitor

DimensionLxWxH: 410×220×420 mm

Weight: 20 kg

Standard configuration: Main body (Including 1 set of cartridges)+15 liters tank+ TDS pen +accessory bag

Power Consumption (W): 72 W

Power Supply: AC110-220 V, 50/60 Hz

Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span. 

**PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet,

 UF:ultrafiltration, TF:terminal microfiltration. 

***Value of number will be influenced by temperature and feed water quality. 

****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.

Particle(>0.2µm): <1/ml

Resistivity(25°C): 18.2 MΩ.cm

TOC***: <10 ppb

Heavy metal ion: <0.1 ppb

Flow rate: 2.0 L/min (with pressure tank)

Endotoxin: <0.001 EU/ml

RNases: <0.01 ng/ml

DNases: <4 pg/µl

Datasheet