Memmert ICP450 圧縮器用冷却インキュベーター

Temperature
Working-temperature range     from -12°C up to +60°C (Optimum performance of cooling aggregate at an ambient temperature of +16°C up to +32°C. Not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over.)
Setting accuracy temperature     0.1°C
Temperature     2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Control technology
ControlCOCKPIT     TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language setting     German, English, Spanish, French, Polish, Czech, Hungarian
Timer     Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT     the process time does not start until the set temperature is reached
Calibration     three freely selectable temperature values
adjustable parameters     temperature (Celsius or Fahrenheit), fan speed, programme time, time zones, summertime/wintertime
Communication
Documentation     programme stored in case of power failure
Programming     AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Safety
Temperature control     mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
Temperature control     over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY     additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic system     for fault analysis
Alarm     visual and acoustic
Heating concept
Air jacket     air jacket heating system for gentle all-around heating
Heating concept     no drying-up of the load caused by the cooling device due to separation of thermal jacket from interior
Cooling     energy-saving use of CFC-free cooling/heating system (refrigerant R134a)
Defrosting     highly efficient automatic defrosting system
Standard equipment
Internals     2 stainless steel grid(s), electropolished
Scope of delivery     incl. works calibration certificate for +10°C and +37°C
Door     inner glass doors
Door     fully insulated stainless steel doors with 2-point locking (compression door lock)
Stainless steel interior
Volume     449 l
Dimensions W x H x D in mm     w(A) x h(B) x d(C): 1040 x 720 x 600 mm
Max. number of internals     8
Max. loading of chamber     200 kg
Max. loading per internal     30 kg
Textured stainless steel casing
Installation     on lockable castors
Dimensions     w(D) x h(E) x d(F): 1224 x 1613 x 784 mm
Housing     rear zinc-plated steel
Electrical data
Voltage Electrical load     230 V, 50/60 Hz
approx. 1200 W
Voltage Electrical load     115 V, 50/60 Hz
approx. 1200 W
Packing/shipping data/Setting Up
Set Up     The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Transport information     The appliances must be transported upright
Customs tariff number     8419 8998
Country of origin     Federal Republic of Germany
WEEE-Reg.-No.     DE 66812464
Dimensions approx incl. carton     B x H x T: 1330 x 1700 x 1050 mm
Net weight     approx. 217 kg
Gross weight carton     approx. 282 kg

datasheet