MEMMERT IF30mplus インキュベーター (32L, twin display)

Volume: 32 liters

Interrior dimensions: 400W x 320H x 250D mm

Exterior dimensions: 585W x 704H x 434D mm

Stainless steel grids: 1

Max. number of grids: 3

Max. loading per grid: 20 kg

Max. loading of chamber: 60 kg

Working temperature range: min. 10 above ambient temperature to 80°C

Setting accuracy: 0.1°C

Control technology

ControlCOCKPIT: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.

Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function HeatBALANCE: adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %

Function SetpointWAIT: the process time does not start until the set temperature is reached

Calibration: three freely selectable temperature values

adjustable parameters: temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Sterilisation: fixed sterilisation programme (4 hours/160°C) for sterilisation of working chamber, not for sterilising the load

Ventilation

Convection: natural convection

Fresh air: Admixture of pre-heated fresh air by electronically adjustable air flap

Vent: vent connection with restrictor flap

Communication

Documentation: programme stored in case of power failure

Programming: AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

Ambient temperature: 5 – 40°C

Humidity: max. 80% rh, non-condensing

Voltage: 230 V, 50/60 Hz

Electrical load: 1600 W

Installation: mounted on lockable castors

Standard equipment

Works calibration certificate: incl. works calibration certificate for +37°C

Door: inner glass doors

Door: fully insulated stainless steel doors with2-point locking(compression door lock)

Internals: 1 stainless steel grid(s), electropolished

Datasheet