RAISE3D E2 Desktop 3D Printer

Build Volume

Single Extruder Print: 330 × 240 × 240 mm (13 × 9.4 × 9.4 inch)

Dual Extruder Print: 295 × 240 × 240 mm (11.6 × 9.4 × 9.4 inch)

Machine Size (W × D × H): 607 × 596 × 465 mm (23.9 × 23.5 × 18.3 inch)

Weight

Net Weight: 35.1 kg (77.4 lbs)

Gross Weight (Carton Only): 43.8 kg (96.6 lbs)

Gross Weight (Carton with Pallet): 51.3 kg (113.1 lbs)

Electrical

Power Supply Input: 100–240 V AC, 50/60 Hz 230 V @ 2 A

Power Supply Output: 24 V DC, 350 W

Print Technology: Fused Filament Fabrication (FFF)

Print Head System: IDEX Independent Dual Extruders

Filament Diameter: 1.75 mm

XYZ Step Size: 0.78125, 0.78125, 0.078125 micron

Print Head Travel Speed: 15–150 mm/s

Build Plate: Flexible Steel Plate with BuildTak

Max Build Plate Temperature: 110℃

Heated Bed Material: Silicone

Build Plate Leveling: Mesh-leveling with Flatness Detection

Filament Run-out Sensor: Available

General

Layer Height: Compatible with 0.2, 0.4, 0.6, 0.8, 1.0 mm nozzles (recommended 0.1–0.3 mm for best results)

Nozzle Diameter: 0.4 mm (Default), 0.6/0.8 mm (Available)

Hot End: V3P

Max Nozzle Temperature: 300℃

Connectivity: Wi-Fi, LAN, USB Port, Live Camera

Noise Emission (Acoustic): < 50 dB (A) when building

Operating Ambient Temperature: 15–30℃, 10–90% RH, non-condensing

Storage Temperature: –25℃ to +55℃, 10–90% RH, non-condensing

Filter: HEPA Filter with Activated Charcoal

Technical Certifications: CB, CE, FCC, RoHS, RCM

Material

Material Type: PLA/ ABS/ ASA/ PETG/ PC/ PETG ESD/ TPU 95A/ PVA+

Third Party Material: Supported by Raise3D OFP (Open Filament Program)

Software

Slicing Software: ideaMaker

Supported File Types: STL/ OBJ/ 3MF/ OLTP

Supported OS: Windows/ macOS/ Linux

Machine Code Type: GCODE

Printer Controller

User Interface: 7-inch Touch Screen

Network: Wi-Fi, Ethernet

Power Loss Recovery: Available

Screen Resolution: 1024 × 600

Motion Controller: Atmel ARM Cortex-M4 120 MHz FPU

Logic Controller: NXP ARM Cortex-A9 Quad 1 GHz

Memory: 1 GB

Onboard Flash: 16 GB

Embedded Linux OS

Ports: USB 2.0 × 2, Ethernet × 1

Datasheet