SCHMIDT ZTA-10k-DPU フォースゲージ (0 – 10 kN)

Capacity N: 0 – 10 kN

Resolution: 10 N

Capacity gf; kgf: 0 – 1000.0 kgf

Capacity ozf; lbf: 0 – 2200.0 lbf

Measuring shaft: M18 female screw

Measuring principle: Bidirectional force sensor with strain gauge

Accuracy: ±0.2 % full scale ±1 digit

Measuring units: N, kgf (gf), lbf (ozf) selectable

Display: OLED, 4 digit

Sampling rate: 2000 times/sec

Overload capacity: Approx. 200 % full scale, symbol flashes at 110 % full scale

Display update rate: 16 times/sec

Plug gauge: 

+ Measuring range up to 500 N: M6 male thread 

+ Measuring range 1000 N up to 5000 N: M10 male thread 

+ Measuring range 10 kN and 20 kN: M18 female thread 

Memory: Internal memory for max. 1000 values; recallable peak – compression/tension

Setpoints: Programmable Max/Min setpoint with colour-coded indicators in the LED display

Output signal setpoints: Open collector: +NG, OK, -NG, OVL (to stop feed at Fmax or overload)

Output signal: RS-232 (8, 1, N, 19200), analog ±2 V DC, USB

Temperature range: 0 – 40 °C

Air humidity: 20 – 80 % RH, max.

Power supply: Rechargeable NiMH batteries (approx. 6.5 h continuous use, approx. 2 h charging time) and/or 100 – 240 V AC adapter and two adapters (EU/USA)

Housing material: Die-cast aluminium

Dimensions: 191 x 75 x 34 mm (LxWxH)

Load cell: See dimensions

Weight, net (gross): Approx. 490 g

*Note: No attachment is included with model of measuring range 10 kN and higher. These models do not have measuring shaft, but there is a female thread in place of a measuring shaft.

Delivery Includes: Indicator and separate force sensor with carrying case, standard accessories (depending on model), AC adapter, USB connecting cable, 1 CD-ROM with USB-driver and simple software for data transfer, manufacturers inspection certificate, operating instruction in German or English (as requested). From tension range 10 kN and higher, there are no accessories.

Dimensions