Senseca HD2102.2 Portable Luxmeter Data Logger

Measured quantities: lux - fcd - lux/s - fcd/s - W/m2 - µW/cm2J/m2 - µJ/cm2 - µmol/(m2.s) - µmol/m2 -cd/m2 - µW/lumen

Power Supply

Batteries: 4 1.5V type AA batteries

Autonomy: 200 hours with 1800 mAh alkaline batteries

Power absorbed with instrument off: 20 μA

Mains (SWD10): Output mains adapter 12 Vdc / 1A

Security of memorized data: Unlimited, independent of battery charge conditions

Measured values storage

Type (for single probes): 2000 pages containing 19 samples each

Type (for combined probes): 2000 pages containing 7 samples each

Quantity (for single probes): total of 38000 samples

Quantity (for combined probes): total of 14000 samples

Selectable storage interval

1, 5, 10, 15, 30 s

1, 2, 5, 10, 15, 20, 30 min

1 hour

Serial interface RS232C

Type: RS232C electrically isolated

Baud rate: can be set from 1200 to 38400 baud

Data bit: 8

Parity: None

Stop bit: 1

Flow Control: Xon/Xoff

Serial cable lenght: Max 15m

Print interval: immediate or selectable between:

1, 5, 10, 15, 30 s

1, 2, 5, 10, 15, 20, 30 min

1 hour

USB interface

Type: 1.1 - 2.0 electrically isolated

Connections

Input module for the probes: 8-pole male DIN45326 connector

RS232 serial interface: 8-pole MiniDin connector

USB serial interface: 8-type MiniUSB connector

Mains adapter: 2-pole connector (positive at centre)

Time

Date and time: in real time

Accuracy: 1min/month max drift

Operating conditions

Working temperature: -5…50 °C

Storage temperature: -25…65 °C

Working relative humidity: 0…90% RH without condensation

Protection degree: IP66

Instrument

Dimensions  (Length x Width x Height): 185 x 90 x 40 mm

Weight: 470 g (complete with batteries)

Material: ABS, rubber

Display: 2x4½ digits plus symbols

Visible area: 52x42 mm

Datasheet

Manual