お得な情報を受け取る
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
クイックサポート
認定専門家へ直接アクセス
数量割引、まとめ買い価格の更新、新製品情報をメールでお届けします。
登録することで、当社の利用規約およびプライバシーポリシーに同意したものとみなされます。
認定専門家へ直接アクセス
Temperature range: +5℃ to +25℃
Control accuracy (*1): ±2.0 to 3.0℃, Compressor On-Off control
Cooling capacity [kW](50/60kHz, Circulation temperature at +20℃)(*2): 57.4/60.3
Compressor output, Refrigerant: 9.0kW×2, R407C
Pumping capacity (50/60kHz)(*3): Ask us
Safety device/function: Short/Over current breaker, Overload protector, High and Low temperature, Refrigerant high and low pressure, Overheat protector for Compressor, Phase-reversal relay, Overheat protector for Compressor, Low water cut off, Warning indicator lamp
Water bath capacity (at 80% water level): Ask us
Required primary cooling water rate [L/min](cooling water temperature: +25℃/+34℃)(*4): Ask us
Connecting pipe diameter (circulating fluid in/out, primary cooling water in/out): Ask us
Dimensions: Ask us
Weight: Ask us
Power Supply／Operation current: AC200V, 50/60Hz/three phase *Ask us for more information.
Catalog
(*1)Performance may not be maintained due to environmental temperature, heat load, circulation pipe distance, etc.
(*2)Capacity when the ambient temperature at below +30℃.
(*3)Capacity when using tap water. Flow rate when the discharge pressure at 0.1 MPa.
(*4)The required cooling water flow increases and decreases by the temperature. Please note that if the flow rate does not increase when the temperature is high, it may cause problems.
•Since the water-cooled type requires primary cooling water for cooling, please make sure the specified flow rate is secured.
•Standard products cannot use pure water as circulating fluid.
•Please ask us when mixing chemicals for water treatment to circulating fluid.
•The fee for Delivery and Installing are quoted separately.
