Input Voltage: Factory built to 220V to 240V, 110V to115V or 100V.
Factory configure to 50Hz or 60Hz.
Installation Category II.
Supply Tolerances: Voltage ± 10%. Frequency ± 1%
Output Voltage: Tracks the amplitude of the fundamental of the input
voltage. A variable voltage input may be used to adjust the output voltage to within the limits specified byEN61000–3–2.
Output Distortion: Dependent on the purity of the input but will generally meet the requirements of EN61000–3–2.
Output Current: Maximum continuous output current is 4·4A (10A peak).
Output Power: Maximum output power is input voltage x 4·4 VA
Input Connection: IEC connector; front panel switch.
Output Connection: U.K., Schuko, or other national outlet sockets. Load
power switch can be set to DIRECT or CORRECTED for
‘A–B’ comparisons.
Protection: Thermal trip automatically diverts load to a DIRECT connection in the event of thermal overload.
Operating Range: +5°C to +35°C at full rated output; 20% to 80% RH
(non-condensing).
Storage Range: –40°C to +70°C
Environmental: Indoor use at altitudes to 2000m, Pollution Degree 2.
Safety: Complies with EN61010–1
EMC: Complies with EN31326.
Size: 357 x 132 x 235mm mm (W x H x D)
Weight: 5.5 kg.
