TOA DKK MM-43X マルチインジケーター水質計
生産者: TOA DKK Model: MM-43X 起源: Japan 品物を保証します: 12 Month - 要件クオート
- 連絡先
-Measurement Method:
+pH: Glass Electrode Method
+ORP: Platinum Electrode
+Ion: Ion Electrode Method
+Conductivity: AC 2-Electrode Method
+DO: Membrane Polarographic Method
+Temperature: Thermistor Resistor
-Conductivity Measuring Frequency: 80Hz/3kHz automatic selection
-Electrode Inputs: 2ch (pH/ORP/Ion/DO Electrode/Conductivity cell connectable)
-Display Unit: Touch Panel Color Graphic LCD
-Display: Selectable 2-ch Simultaneous Display or Single Only Display
-Measurement Item/Range:
+pH: pH 0.000 ~14.000
+mV(ORP): -2000.0 ~ 2000.0 mV
+Ion: Depends on the sensor
+Conductivity: Depends on the cell
+Resistivity: Conversion from conductivity Depend on the cell
+Salinity: Conversion from conductivity
+Concentration: Conversion from conductivity
+TDS: Conversion from conductivity
+DO: Depends on the electrode Saturation %
+Temperature: 0.0 ~100.0℃; DO:0.0 ~ 50.0℃; Ion:Depends on the sensor (No temperature measurement function)
-Display Range:
+pH: pH-2.000 ~16.000
+mV (ORP): -2200.0 ~ 2200.0 mV
+Ion (Manual/Auto range switching) (mol/L selectable):
ZOOM OFF:
0.0 ~19.9μg/L
20 ~199μg/L
0.20 ~1.99mg/L
2.0 ~19.9mg/L
20 ~199mg/L
0.20 ~1.99g/L
2.0 ~19.9g/L
20 ~199g/L
200 ~1990g/L
ZOOM ON:
0.00 ~19.99μg/L
20.0 ~199.9μg/L
0.200 ~1.999mg/L
2.00 ~19.99mg/L
20.0 ~199.9mg/L
0.200 ~1.999g/L
2.00 ~19.99g/L
20.0 ~199.9g/L
200 ~1999g/L
+Conductivity(Manual/Auto range switching)(Depends on the cell)
0.0 ~ 200.0μS/m (0.000 ~ 2.000μS/cm)
0.000 ~ 2.000mS/m (0.00 ~ 20.00μS/cm)
0.00 ~ 20.00mS/m (0.0 ~ 200.0μS/cm)
0.0 ~ 200.0mS/m (0.000 ~ 2.000mS/cm)
0.000 ~ 2.000S/m (0.00 ~ 20.00mS/cm)
0.00 ~ 20.00S/m (0.0 ~ 200.0mS/cm)
0.0 ~ 200.0S/m (0.000 ~ 2.000S/cm)
SI unit (S/m) and conventional unit (S/cm) selectable
+Resistivity(Manual/Auto range switch)(Depends on the cell)
0.005 ~ 2.000 Ω・m (0.5 ~ 200.0Ω・cm)
0.00 ~ 20.00 Ω・m (0.000 ~ 2.000kΩ・cm)
00.0 ~ 200.0 Ω・m (0.00 ~ 20.00kΩ・cm)
0.000 ~ 2.000kΩ・m (0.0 ~ 200.0kΩ・cm)
0.00 ~ 20.00kΩ・m (0.000 ~ 2.000MΩ・cm)
00.0 ~ 200.0kΩ・m (0.00 ~ 20.00MΩ・cm)
0.000 ~ 2.000MΩ・m (0.0 ~ 200.0MΩ・cm)
0.00 ~ 20.00MΩ・m (0 ~ 2000MΩ・cm)
SI unit (Ω・m) and conventional unit (Ω・cm) selectable
+Salinity:
0.00 ~ 4.04% (NaCl)
0.00 ~ 42.40psu (PSS:Sea water salinity)
+Concentration(Auto range switch):
0 ~ 2.000%
0 ~ 20.00%
0 ~ 200.0%
+TDS(Manual/Auto range switch):
0 ~ 99.99mg/L
0 ~ 999.9mg/L
0 ~ 9.999g/L
0 ~ 99.99g/L
0 ~ 999.9g/L
+Dissolved Oxygen: 0.00 ~ 22.00mg/L (High range membrane set (Option) 0.00 ~55.0mg/L)
+Saturation: % 0 ~ 220.0% (High range membrane set (Option) 0 ~ 550%)
+Temperature: -5.0 ~110.0℃
-Display Resolution Switching:
+pH: 0.01pH/0.001pH
+mV (ORP): 1mV/0.1mV
+Ion: 0.0μg/L~1990g/L (Maximum to 3 digits); 0.00μg/L~1999g/L (Maximum 4 digits)
-Repeatability(Main body unit):
+pH: ±0.002pH
+mV (ORP): ±0.2mV
+Ion: ±0.5% FS
+Conductivity: ±0.5% FS
+Resistivity: ±0.5% FS
+Salinity: ±0.5% FS
+Concentration: ±0.5% FS
+TDS: ±0.5% FS
+Dissolved Oxygen: ±0.03mg/L (Standard membrane); ±0.1mg/L (High range membrane)
+Saturation: % ±1% (Standard membrane/High range membrane)
+Temperature: within ±0.2℃
-Temperature compensation:
+pH: Temp. compensation range: ATC (Auto Temperature Compensation): 0 ~100.0℃; MTC (Manual Temperature Compensation): 0 ~100.0℃
+Conductivity:
Temp. compensation range: ATC (Auto Temperature Compensation): 0 ~100.0℃; MTC (Manual Temperature Compensation): 0 ~100.0℃
N/A: ATC OFF
Standard Temp. setting: 0 ~100.0℃
Temperature Coefficient(Linear): 0 ~10.00%/℃
Temperature Coefficient(Multipoint): 2 ~10 points
Pure Water Dual Temperature Compensation: yes
+Dissolved Oxygen: Temperature Compensation Range: ATC (Auto Temperature Compensation): 0~ 50.0℃;
-pH calibration: JIS pH Standard Solution, US Standard Solution, Custom Standard Solution, Max. 5-point Calibration
-Ion calibration: Max.5-point Calibration
-DO calibration: Auto Calibration (Zero Span Calibration)
-Temp. calibration: 1-point Calibration
-Conductivity Concentration Conversion Setting: 2-10 points
-DO Salinity Compensation Setting: yes
-DO ATM Pressure Compensation Setting: yes
-Performance Guaranteed Temperature, Humidity: 0 ~45℃ 85% or below (Condensation-free)
-Data Memory: 2000 data each channel
-Print Function: Optional External Printer EPS-P30
-Auto Hold Function: yes
-Auto Hold Conditions Setting: yes
-Statistical Calculation Function: Average Value
-Calibration History Creation Function: Max. 20 run lots
-Interval Measurement: yes
-Security Function: yes
-Upper/Lower Limit Output Setting: yes (1ch only)
-External Input/Output:
+RS-232C Interface: yes (2ch)
+USB (Host): yes
+USB (Peripheral, Micro): yes
+Analog Output:
pH: ±700mV (pH0 ~ 14)
mV (ORP): ±1V (0 ~ ±2000mV)
Ion: 0 ~1VFS
Conductivity/Resistivity/Salinity/Concentration/TDS: 0 ~1VFS
DO/Saturation: 0 ~1VFS
Range(Ion/Conductivity/Resistivity/Salinity/Concentration/TDS): 100mV/Range
Temperature: 0 ~1V (0 ~100℃)
Alarm (1ch only): Upper Limit: Open Collector ; Lower Limit: Open Collector
-Option Connection:
+External Printer: yes
+Turntable (TTT510/710): yes
+Electrode Selector(ES-1G): yes
+Cell Selector (ES-1GC) : yes (Single option can be connected to ch-1)
+Control Box (AC-1V): yes (For ch-1 only)
-Power Source: AC100 ~ 240V (AC Adapter)
-Power Consumption: Approx. 18VA
-Main Unit Dimensions(Excluding Protruding Parts): Approx. 130 W×60 H×230 D mm
-Main Unit Weight: Approx. 0.9kg
-Inluding:
+ Main unit
+ Sensor Holder: 7430850K
+ Sensor stand (Stand, strut, stopper): 7430860K
+ Tilt stand: 7430870K
+ Sensor attachment (G): 0IB00004
+ Sensor attachment (J): 0IB00005
+ Sensor attachment (DP): 0IB00007
+ Sensor attachment (ION): 0IB00006
+ AC adapter: 7430880K
+ Power cord: 118C229
+ Ground wire (2m): X0979500
+ Beakers (150mL): 0DE00001 (3pcs)
+ Manual
*Note*: Sensors are not included. Necessary ones will ve sold separately.
-Tính năng:
+ Màn hình cảm ứng màu hiện đại
+ Mỗi kênh có thể được kết nối với các điện cực pH/ORP/Ion/DO/Độ dẫn điện
+ Có 2 cổng kết nối (chức năng nhận dạng tự động)
+ Tự động nhận dạng PC, bàn xoay, máy in
+ Thiết bị chuẩn USB
+ Chức năng bộ nhớ dữ liệu lớn(2.000 dữ liệu mỗi kênh)
Các hạng mục đo:
pH, ORP, độ dẫn điện, điện trở, độ mặn, ion, nhiệt độ, DO, bão hòa.
Ứng dụng: Thiết bị này dùng để đo pH, độ dẫn điện, điện trở, độ mặn, DO,TDS, nồng độ trong phòng thí nghiệm.
Datasheet
- 良質な取り決め
- オリジナル保証
- 宅配便
- 買い取り簡単化