Yokogawa 96065 電流クランプ プローブ（0-1000Arms）

Measureable conductor size: Max. φ110mm

Measuring range: AC 0 to 1000Arms(1850Apeak)

Output voltage: AC 0 to 500 mVrms (0.5 mV/A)

Accuracy (sine wave input): + Band width: ±0.8% rdg ±0.2 mV(45 to 65 Hz) ±1.5% rdg ±0.4 mV(40 to 1 kHz)

+ Phase: ±2.0° or less (45Hz to 65 Hz) ±3.0° or less (40Hz to 1 kHz)

Temperature & humidity range (guaranteed accuracy): 23 ±5°C, 85%RH or less(no ondensation)

Current consumption (at power supply 3V): 2 mA max. (at power supply ±5 V)

Rated voltage between circuit and ground: AC 600 Vrms max

Operating temperature & humidity range: 0 to 50°C, 85% RH or less (no ondensation)

Storage temperature & humidity range: -20 to 60°C, 90% RH or less (no ondensation)

Temperature coefficient: 0.03% rdg./°C (-10 to 50°C)

Maximum allowable input: AC 1300 Arms

Influence of the conductor location: Within ±1.5%rdg

Influence of the external magnetic field: Current that flows through the conductor ±2.0% rdg or less when separated by a distance of D/4 (37.5 mm) from the conductor

Output impedance: 100Ω or less

Withstand voltage: AC5.4kVrms / 5 seconds Between circuit and sensor.

Recommended calibration period: 1 year

Environmental condition: Altitude up to 2000 m, in-door use

Dimension: 24(W) × 65(H) × 22(D)mm (excluding projections)

Cable length Clamp sensor – circuit box: approx. 2.7m Circuit box – output terminal: approx. 0.2m

Output terminal: MINI DIN 6PIN

Weight: Approx.170g

Accessory: Instruction manual, Cable marker