Dung tích: 760 lít
Điều khiển:Bộ điều khiển PID
Nhiệt độ:
Dải nhiệt độ: -5~85℃
Độ biến động: 0.3℃
Độ biến thiên: ±0.7℃
Độ ẩm:
Dải độ ẩm: 20~85%
Độ biến động: 3%
Độ biến thiên: 5%
Nguồn sáng: Cool White, Ultraviolet, Light uniformity
Thời gian: làm nóng: 25min (20℃ → 85℃)
: làm lạnh: 35min (20℃ → -5℃)
Hệ thống làm lạnh: Air-cooled/ R-404A
: Công suất: 470 W
Vật liệu: Ni-Cr Wire Heater / SUS Tube Heater, SUS # 304, Polyurethane
Cảm biến: Nhiệt độ: Pt100
: Độ ẩm: Electronic sensor
Nhiệt độ hoạt động: 18℃ to 30℃
Thùng chứa nước: dung tích: 15 lit/ pH6.2~7.2
Giao tiêp: Basically RS-232C, [RS-485 : optional]
Cáp nối: Basically one hole provided / Ø 50mm (2"),Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2")
Kích thước: Bên trong:750×880×1160mm
: Bên ngoài:1220×1215×1965mm
Khối lượng: 400±10 kg
Nguồn điện: AC230V, 1ph, 50Hz 23.5 A Cat.No. AAHC1012K
Temperature & Humidity Control range

- TH-TG (190 to 960L)
- 40~90% RH at 10℃
- 20~95% RH at 30℃
- 10~95% RH at 50~80℃
- 10~80% RH at 90℃
TH-TG (1500L)
- 40~90% RH at 15℃
- 30~95% RH at 30℃
- 20~95% RH at 50~80℃
- 20~85% RH at 85℃
TH-ICH (300, 760L)
- 40~80% RH at 15℃
- 30~85% RH at 30℃
- 20~85% RH at 50~85℃
Constructional Features
- High quality #304 stainless steel exterior and interior.
- Casters for easy mobility when installing or moving environmental test chamber.
- Convenient maintenance
- Available to check total operating time.
- Unique door lock & trim.
- Vice lock type door and foam silicone packing to ensure a perfect seal.
- Cable port for external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit. Additional 50mm or 80mm diameter cable ports can be custom ordered. (optional)
- Container type tank for easy adding and changing of water.
- Maintenance of the water tank can be easily performed from the front side.
- Door lock.
- Cyclic defrost functions does not affect the temperature and humidity control for extended operation.
(Under 15℃ set value)
- Powerful two Sirocco fans maintains a constant airflow in the chamber.
Safety Features
- Leakage breaker for power supply.
- Over current protection.
- Overheat / overcool protection.
- Switch-off after alarm for over heating.
- Water empty alarm.
- Door open alarm.
- Vice lock door type locking mechanism.
Operating Features
- Microprocess PID control / Auto-tuning / Calibration.
- Digital LCD display with touch-sensitive 7 keypads.
- Easy operation with wide LCD screen.
- Temperature and humidity / timer settings and operation condition.
- Program patterns are memorized for 10 years due to a battery built into the PCB.
- Expansion parameter inputs. (conveniently display by letters)
- Programming operation.
- Computer interface.
- Software provided.
- Save data in excel format.
- Storage of program information, backup of value settings / recovery, and temperature / humidity values.
- RS-232C port as standard offer.
- Chart recorder. (optional)
- 6-point dots type recorder with digital display.
- Digital recorder. (6-channels)
- In the event of a validation the apparatus correctly controls each light and then transfers accurate data and is equipped with light sensors. (UV light sensor / VIS light sensor)
- Samples that have to be exposed to the light in which it is completely near the UV energy of less than 200W-hr/m2 is provided to compare directly the results from overall intensity of less than 1.20 million lux-hr, drug substances and reagent.
- Total fluorescent lamp and UV lamp indicator and operating time indicator.
Safety Features
- Leakage breaker for power supply.
- Over current protection.
- Overheat protection.
- Switch-off after alarm for over heating.
- Door open alarm.
- Water empty.
- Vice lock door type locking mechanism. (optional)
- Alarm for completed Photostability Test.
| Model |
TH-ICH-300 |
TH-ICH-800 |
| Chamber Volume (L / cu ft) |
300 / 10.6 |
760 / 26.8 |
| Controller |
PID control (LCD Type) |
| Temperature 1) |
Range |
without Humidity (℃ /oF) |
-5 to 85 / 23 to 185 without Light |
| 0 to 85 / 32 to 185 with Light |
| with Humidity (℃ / oF) |
+15 to 85 / 59 to185 with Light |
| Fluctuation 1) (±℃ / oF) at 40℃ / 60%RH |
0.3 / 0.55 |
0.3 / 0.55 |
| Variation 1) (±℃ / oF) at 40℃ / 60%RH |
0.5 / 0.9 |
0.7 / 1.3 |
| Humidity |
Range (%RH) |
FULL RANGE : 20 to 85 40 to 80 at 15℃ (59oF) 30 to 85 at 30℃ (86oF) 20 to 85 at 50℃ to 85℃ (122oF to 185oF) |
| Fluctuation 2) (±%RH) at 60%RH / 40℃ |
3 |
| Variation 2) (±%RH) at 60%RH / 40℃ |
5 |
Light Source (ICH Q1B option 2) |
Cool White 3) |
6,000 lux |
6,500 lux |
| Ultraviolet-A 3) |
4.5 W/㎡ |
5 W/㎡ |
| Light Uniformity |
VIS. : ±10% UVA : ±15% |
VIS. : ±15% UVA : ±15% |
| Typical Time Required to Reach ICH Recommendation of 1.2 million lux-hr |
≒ 200Hr |
≒ 184Hr |
| Typical Time Required to Reach ICH Recommendation of 200 W-hr/m2 |
≒ 50Hr |
≒ 40Hr |
| Time |
Heating 4) |
25min (20℃ → 85℃) |
30min (20℃ → 85℃) |
| Cooling 4) |
35min (20℃ → -5℃) |
40min (20℃ → -5℃) |
| Refrigeration |
System |
Air - cooled |
| Refrigerant |
R- 404A |
| Capacity (W) |
250 |
470 |
| Cooler |
Copper plate fin cooler |
| Heater |
Material |
Ni-Cr Wire Heater / SUS Tube Heater |
| Drying Bulb (W) |
1500 |
2300 |
| Humidity Bulb (W) |
1200 |
2000 |
| Sensor |
Temperature |
Pt 100 |
| Humidity |
Electronic sensor (Free of drying a wet pack and good response time) |
| Air Flow |
2 set of sirocco fan (2×60 W) : Vertical type |
| Material |
Internal |
SUS #304 (2B polish) |
| External |
SUS #304 (Hairline finish) & Steel, 2t, Double painted & baked |
| Insulation |
Polyurethane (70mm / 2.76") |
| Door |
EPDM Sheet |
| Operating Temperature |
18℃ to 30℃ / 64.4oF to 56oF, 85%RH (Non-corrosive and pure place) |
| Water Tank |
Capacity (L / cu ft) |
15 / 0.53 |
| Water Quality |
pH6.2 ~ 7.2, Electrical conductivity 20㎲ / cm to below |
| Interface Port |
Basically RS-232C, [RS-485 : optional] |
| Cable Port |
Basically one hole provided / Ø 50mm (2"),Optionally max. two holes available / Ø 50 or 80mm (2 or 3.2") |
Dimension (W×D×H) |
Internal (mm / inch) |
750×650×650 / 29.5×25.6×25.6 |
750×880×1160 / 29.5×34.6×45.7 |
| External (mm / inch) |
1130×985×1520 / 44.5×38.8×59.8 |
1220×1215×1965 / 48×47.8×77.4 |
| Net Weight (kg / lbs) |
280±10 / 617±22 |
400±10 / 882±22 |
| Electrical Requirements |
AC230V, 1ph, 60Hz |
15.4 A |
24.5 A |
| Cat.No. |
AAHC1001K |
AAHC1011K |
| AC230V, 1ph, 50Hz |
14.7 A |
23.5 A |
| Cat.No. |
AAHC1002K |
AAHC1012K |
1) All specifications are under ambient temperature 20℃ (68oF), No load.
2) Technical data according to DIN 12880, IEC 60068.
3) The value is measured on the center of chamber at the point of vertical direction.
4) Up to 98% of the set value.