Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi

Điện áp xung: 200V~6000V, 10V stepper, 5% ± 10V
Dải đo độ tự cảm: ≥10μH
Năng lượng xung: Tối đa 0.36 joule
Tốc độ đo: Tối đa 12 lần/giây
Số xung áp dụng: Tối đa 32 lần xung thử nghiệm, tối đa 8 lần xung khử từ
Trở kháng đầu vào: 10MΩ
Màn hình hiển thị: 800×480 điểm, 65k màu TFT, phạm vi hiển thị dạng sóng 650×256, hỗ trợ phóng to 1.5 lần
Thu thập dạng sóng: Tốc độ lấy mẫu: Lên đến 100M sps, 10 mức điều chỉnh, độ phân giải: 8 Bit, độ sâu bộ nhớ: 6500 byte, trung bình mẫu: 1~32
Phương pháp đánh giá: Diện tích, sự khác biệt diện tích, phóng điện corona, độ lệch pha
Độ chính xác lặp lại của phép đo: ±1%
Đo dạng sóng: Điện áp dạng sóng, tần số dạng sóng, thời gian dạng sóng
Phương pháp kích hoạt: Kích hoạt thủ công, kích hoạt nội bộ, kích hoạt bên ngoài, kích hoạt bus
Đầu ra đánh giá: Hiển thị OK/NG, đèn LED chỉ thị, cảnh báo bằng còi
Thống kê đo lường: Chức năng thống kê bao gồm thời gian đo và kết quả đo, lưu trữ tối đa 20.000 nhóm
Bộ nhớ:
Bộ nhớ trong: 300 nhóm (dữ liệu dạng sóng tiêu chuẩn và tham số cài đặt đo lường)
USB Disk: 600 nhóm (dữ liệu dạng sóng tiêu chuẩn và tham số cài đặt đo lường)
Giao diện:
Handler (START, STOP, PASS, FAIL, BUSY, EOC), RS232C
Thiết bị USB (hỗ trợ USB TMC và USB CDC)
Host USB (hỗ trợ FAT16 và FAT32, lưu trữ tệp hình ảnh BMP, GIF, PNG, lưu trữ dữ liệu dạng sóng dạng CSV và dữ liệu thống kê, và hỗ trợ các tệp cài đặt)
GPIB (option)
Nguồn:
Điện áp: 220V ± 10%, 50Hz + 5%
Công suất tiêu thụ: ≤50VA
Điều kiện hoạt động:
Nhiệt độ môi trường làm việc: 0℃~40℃
Độ ẩm: ≤75% RH
Trọng lượng: 7.5kg
Kích thước (HxWxD): 132x400x350 mm
Datasheet
Brief Introduction:
981x series pulse winding tester adopts high-stability high-voltage impact power supply and high-voltage switching device controlled by thyristor module, which greatly improves the stability and reliability of the product; it adopts advanced 32-bit high-performance processor and high-speed FPGA to provide 100Msps Sampling rate and 6500 bytes storage depth make the test more accurate; the proprietary high-speed test technology, the test speed can reach up to 15 times/second.
Performance characteristics:
■ 65k color 7-inch TFT high-definition display, Chinese and English optional operation interface
■ 100Msps waveform sampling rate, 6500bytes storage depth
■ High speed test, up to 15 times/second
■ Four waveform comparison methods: area, area difference, corona and phase difference
■ Powerful corona analysis and extraction function (multiple corona modes and corona display function), dig out potential insulation problems of products
■ Excellent test repeatability to ensure stable test
■ Automatic saving of instrument parameters and loading of startup files
■ Waveform vertical zoom, horizontal zoom and move function, easy to observe details
■ Sample averaging function, can perform up to 32 times of standard waveform average processing
■ Automatic standard acquisition mode, automatically select the appropriate sampling rate
■ Destructive testing selects the appropriate test voltage for you
■ Fast test mode, real-time modification of pulse voltage and sampling rate
■ Application of degaussing pulse to ensure consistent test waveform
■ 20,000 historical measurement data saving and discriminating statistics functions, and can be stored in U disk
■ SAVE button directly save the screen image (BMP, GIF, PNG) or waveform data (CSV) to the U disk
■ Support U disk to upgrade system firmware
■ Foot control interface for simple and fast measurement
■ Handler, RS232C, USB Device, USB Host and GPIB (optional)