Máy cắt điện trở laser JPT LTS-TNF-IR-I (1Ω-10MΩ)

Substrate specification: 0201 and above

Trimming range: 1Ω-10MΩ

Trimming accuracy: 0.1% and 1%

Kerf width: 8-20μm

Laser source: JPT-Green

Measurement channels: 192

Laser Trimmer is mainly used to scan and trim resistors with the short-pulse laser. The laser can “cut out” kerfs of given depth by gasifying the resistive film on the ceramic substrate, altering the length and the cross-sectional area of the resistor and this subsequently changes its resistance value.