빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Measure range: 10~97.00%/99.99%,97%~99.99% O2
Sensor: 3D Ion flow oxygen sensor
Accuracy: ±1%FS
Repeatability: ±0.5%FS
Stability: ±0.5%FS/7d
Response time: T90<20s
Protection level: IP64
Measuring method: gas inlet type
Calibration cycle: one year (recommended)
Power supply: 24V DC
Analyzer power consumption: <25VA
Communication: RS485(standard)/RS232(optional)
Environment temperature: 0~45°C Environment Humidity:<80%RH
Sample flow rate: 400~600ml/min
Sample gas pressure: atmospheric conditions±10% (Gas outlet should be atmospheric conditions)
Switch output: Alarm output:1 set; Relay contact point capacity:24V DC,0.2A
Analog output: 1 set,4-20mA/0-20mA/0-1V/0-5V/0-10V/ 1-5V,(You can set the mode freely). The load:less than 500 Ω
Gas interface: 1/4-inch NPT internal thread, (standard 6.5 stainless steel joint)
Sensor life: more than 2 years (normal use)
Instrument life: more than 5 years (normal use)
Measuring method: wall-mounted
L×W×H=300×200×175mm
Flow meter: Selection
