빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Infrared resolution: 384 x 288
Detector type: Focal Plane Array (FPA), uncooled microthermal
Thermal Sensitivity (NETD): < 50 mk
Pixel spacing: 17 μm
Infrared spectral band: 7.5 μm to 14 μm
Field of View (FOV): Refer to lens parameter configuaration
Spatial Resolution (IFOV): Refer to lens parameter configuaration
Minimum focus distance: Refer to lens parameter configuaration
Lens focal length: Refer to lens parameter configuaration
Focus system: Auto
Temperature range: -20 ℃ to 650 ℃
Temperature measurement range:
Subrange 1: -20 ℃ to 150 ℃
Subrange 2: 0 ℃ to 650 ℃
Accuracy: 15 °C to 35 °C, ±2 °C or ±2% of reading, whichever is greater
Global temperature measurement correction: Emissivity (0.01-1.00), Reflected Temperature (Background Temperature), Transmittance, Atmospheric Temperature, Relative Humidity, Target Distance
Area temperature measurement correction: Area Emissivity (0.01-1.00)
Analysis software: SmartView IR
Color palettes: 16 color palettes such as Iron, Grey and rainbow, palettes can be inverted
Image processing: Non-uniformity correction, intelligent gain control
Image mirror: Left-right, up-down, center
Video streaming compression standard: H.264
Video streaming:
Main streaming
Pixel: 384 x 288
Frequency: 30 Hz
Bandwidth: 1.8 Mb
Sub streaming
Pixel: 384 x 288
Frequency: 30 Hz
Bandwidth: 100 Kb
Fully-radiometric streaming: Yes. 30 Hz
Pan-tilt control: Support Pelco-D protocol
Temperature measurement area: Support temperature measurement points, lines and areas, support Modbus output (the Modbus output is mutually exclusive with the Pan-Tilt control)
Ethernet type: 10M/100M/1000M, adaptive
Network protocols: IPv4, UDP, TCP, RTSP, RTCP, RTP
Concurrent access: 10 channels for main streaming and sub streaming, 1 channel for fully-radiometric
Access standard: ONVIF
Power port: Terminal block, with fixed screw holes
Network interface: RJ45, with fixed screw holes and status indicator
Alarm input/output:
1 relay output: load capacity: 24 V, 1.5 A
1 optocoupled output: output capacity: 3.3-24 V, 35 mA maximum output current
1 channel optocoupled input: input capability: 3.3-24 V, 5 mA-15 mA input current
Serial port: 1 RS-485
Power supply: 12V to 24 V DC, PoE
Typical power consumption: 3 W
Operating temperature: -10 °C to 50 °C
Storage temperature: -40 ℃ to 70℃
Relative humidity: < 90%
Dimensions: 142.25 mm x 71 mm x 70 mm (Standard lens, without base)
Weight: 706 g (standard lens)
Mounting:
Tripod mounting: 2 x 1/4-UNC-20 standard tripod mounting holes
Bottom and top mounting supported
