HILO-test EMC 2015 임펄스 제너레이터 - 시스템 (0.2 - 10 kV ± 2 %)

Mainframe

Microprocessor controlled touch panel: 7”, capacitive

Optical Ethernet Interface for remote control of the generator: optional

Interface for saving reports: USB

External trigger input/output: Switch / 10 V

Peak value of charging voltage, adjustable: 0.2 - 10 kV ± 2 %

Output pulse polarity, switchable: POS/NEG/ALT

Maximum stored energy: 1500 J

Energy storage capacitor (standard version): 30 µF / 10 kV

Charging time: < 20 s

Waveform and amplitude of the pulse output: according to the selected plug-in

Connector for external safety interlock loop: 24 V =

External red and green warning lamps acc. to VDE 0104: 24 V =, 40 mA

Mains power: 230 V, 50/60 Hz

Dimensions of desk top case (W * H * D): 556*470*600 mm³

Weight: 65 kg

Safety Test Cover

Mounted on the top of the equipment

Safety interlock loop: connected to the limit switch

Red and green warning lamps: installed

Dimensions (W * H * D): ca. 440*180*300 mm³

Available Waveform Plug-ins (Part 1)

Impulse current plug-in (basic configuration): 8 / 20 µs, 25 kA

Impulse current plug-in: 10 / 50 µs, 5.0 kA

Impulse current plug-in: 10 / 350 µs, 600 A

Impulse current plug-in: 10 / 700 µs, 300 A

Impulse current plug-in: 10 / 1000 µs, 200 A

Impulse voltage plug-in (special version): 10 / 700 µs, 10 kV

Available Waveform Plug-ins (Part 2)

Combination wave plug-in: 8 / 20 µs, 25 kA / 1.2 / 50 µs, 10 kV

Waveform plug-in for testing varistors:

Impulse current plug-in: 8 / 20 µs, 2.5 kA

Impulse output current, adjustable via charging voltage: 0.2 - 2.5 kA ± 5 %

Waveform of impulse output current acc. to IEC 60060: 8 / 20 µs ± 20 %

Ringing: < 30 %

Current viewing resistor (built-in): 20 mΩ, 20 MHz

Datasheet