Lonroy LR-MD500A Petroleum Product Density Tester (0 ~ 9.9999 g/cm3)

Meet the standards: GB/T1884-2000, ISO3675:1998

The measurement range: 0 ~ 9.9999 g/cm3

Display mode: 8-inch touch high definition color LCD

Temperature control range: room temperature ~ 100℃

Temperature control accuracy: ±0.01℃

Number of test holes: double holes

Measuring cylinder specification: 500ml

Density meter: nine groups

Data records: 1000

Printing method: Thermal printer

Ambient temperature: 5 ~ 40℃

Relative humidity: 10% ~ 80%

Power source: AC220V±10%, 50Hz±5%

Power rate: 1300W

Weight about: 16kg

The LR-MD500A type petroleum product density meter is designed and manufactured in accordance with the standard methods of GB/T1884-2000, ISO3675:1998 for the determination of the density of crude oil or liquid petroleum products and other mixtures, which are normally liquids (which can be converted to the standard density at 20℃ by the petroleum meter).The instrument adopts large screen color LIQUID crystal display, with rich interface content, direct and convenient human-computer interaction.Built-in operating instructions of the instrument on the screen to make the operation easier;The instrument adopts advanced PID temperature control technology, temperature control is accurate and stable;The instrument has double test holes, which can measure the density of two samples at the same time and improve the working efficiency.The instrument has the function of constant temperature timing, which can remind the operator to carry out the next operation in time during the test.The instrument has the function of average calculation. The average value of two consecutive measurements can be displayed and the test results can be saved and printed.The instrument also has the function of data record query, which can refer to the 1000 data records tested before and facilitate comparison and analysis.Widely used in petroleum, electric power, chemical industry, commodity inspection, scientific research and other departments.