빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Loading torque: 105N.m (servo motor + planetary reducer)
Atmospheric pressure: ≥0.8mpa
Injection range: 0-80mm
Injection resolution: 0.1mm
Hopper capacity: 0.2l
Feeding speed: 0.1-60rpm (highest 100rpm, after 60rpm, the torque decreases to 50%)
Opening stroke: 70mm (does not contain the mould)
Injection force: 1.8t (can be increased by a force multiplier System 3.6t)
Maximum emission: 57mpa(backup system upgraded to 113mpa)
Maximum injection rate: 25cm 3(less fluidity of the need to customize the force multiplier system)
Clamping force: 2t(hyperbolic arm clamping device)
Maximum temperature: one/two/three district 360°c
Temperature accuracy: ±0.5°c(temperature constant state)
Power/full load power: individual event ac 220v±10%; 50hz;2200w; 10a
Screw diameter: 20mm
Setting ring outside diameter: 50mm
Columbine spacing: 280*186mm center distance
Mouth size: 360*90*72mm (lxwxt) without die
Mould thickness: 0-25mm
Boundary dimension: 1700×500×950mm
Package size: 1800*700*1100mm
Application materials: engineering plastic pp, pe, pa, abs, tpu, Pla, etc
Gross net: weight of machine 420/380kg
