빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Tension Range: 0.50 – 20.00 daN
Resolution: 0.01 daN
SCHMIDT Calibration Material*: fabric tape
Display unit
Calibration: According to Schmidt factory procedure
Accuracy:
+ for 10 % to 90 % of range: ±1 % full scale and ±1 digit
+ for remainder of range: ±3 % full scale and ±1 digit
Measuring unit: daN
Overrange: 10 % full scale, without accuracy guarantee
Overload protection: 200 % full scale
Measuring principle: Strain gauge bridge
Signal processing: Digital 24 bit A/D converter
Damping: Adjustable electronic damping (Moving averaging)
Measuring frequency internal: Approx. 1 kHz internal
Measuring frequency: 100 Hz: MIN-Peak and MAX-Peak, 2 Hz: AVG, MIN, MAX
Display: 4 digit, 11 mm high
Display update time: Approx. 2 times per second
Memory: Max. 4000 values plus statistics
Output signal: USB
Communications frequency: Max. 100 readings/sec
Connection cable: Sensor to display unit 1.5 m
Temperature coefficient: Gain: less than ± 0.01 % full scale /°C
Temperature range: 10 – 45 ºC
Air humidity: 85 % RH, max.
Auto power off: Approx. after 3 minutes of non-use
Power supply: LiPo accumulator (approx. 60 h continuous use, charging time approx. 3.5 h), USB AC adapter 100 – 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ)
Housing material: Aluminium profile with plastic outer casing (PVC)
Dimensions: See dimensions
Weight net: Approx. 340 g
Sensor
Measuring rollers: 2 x 22 mm ball bearing rollers, total 50 mm
Width of outer rollers: 100 mm (ball bearing rollers)
Reference frame height adjustment: 24 mm
Material: Anodized aluminium
Reference frame dimensions: 108 x 138 mm
Weight, net: Approx. 1000 g
Total weight gross: Approx. 1800 g
* Suitable for 95 % of applications
Delivery Includes: transport packaging, USB AC adapter with 4 adapters (EU/USA/UK/AUS-NZ), USB cable, software »Tension Inspect 3«, operating instruction in German or English (as requested) and Certificate of Compliance with the order 2.1 according EN 10204 free of charge
