Tormach 8L LATHE CNC Lathe Machine

Spindle

Spindle Power: 1.5 hp (1.11 kW)

Spindle Speed: 180 to 5,000 RPM

Through Spindle Bore: 1 in. (26 mm)

Spindle Nose: 5C

Control

Standard Feature: Rigid Tapping

Standard Feature: Single Point Threading

Tail Stock

Taper: MT2

Diameter: 0.9 in. (22 mm)

Travel: 2.2 in. (55 mm)

Travels

X-Axis: 4.5 in. (114 mm)

Z-Axis: 10 in. (254 mm) with tailstock

Motion

X- and Z-Axis Maximum Feed Rate: 150 IPM (3.8 m/min)

Axis Drivers (X, Z): High-Performance, Polyphase Stepper Motors with Leadshine® Microstepping Drivers

Power

Power Requirements: Single-Phase 115 VAC, 50/60 Hz, 15A Breaker

Supplied Plug: NEMA 5-15P plug; requires NEMA 5-15R receptacle

Machine Specifications

Table Length × Width: 7.5 in. × 4 in. (191 mm × 102 mm)

Machine Footprint: 50 in. × 26 in. (1.2 m × 0.7 m)

Typical System Weight: 838 lb. (380 kg)

Maximum Swing Over Bed: 8 in. (200 mm)

Maximum Swing Over Carriage: 4 in. (100 mm)

Overall System Height: 52 in. (1.3 m)

Accessories

Quick Change Tool Post: Standard

Full Enclosure: Standard

Automatic Collet Closer: Optional

Machine Stand: Optional

Coolant: Optional

PATHPILOT® Controller

Features: User-friendly design

Axis Support: Support for up to four axis continuous machining

Programming: Intuitive conversational programming

Usable G-Code Memory: PathPilot Controller: 80 GB; PathPilot Operator Console: 40 GB

Software Updates: Free PathPilot® updates for life

Datasheet