빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Method: Forced circulation
Temperature control range: Room temp.+ 10℃ to 210℃ (Ambient temp.: 23℃, No load, Damper: full opened)
Temperature adjustment accuracy: ±0.5℃ (at 210℃)
Temperature distribution accuracy: ±2.0℃ (at 210℃)
Time required to reach highest temperature: Approx. 60min
Interior: Stainless steel plate (SUS304)
Exterior: Electrical zinc plated steel plate, Epoxy and melamine resin coating
Heat insulation material: Glass wool
Heater: Stainless pipe heater 1.34kw
Fan/motor of blower: Sirocco fan/Condenser motor: 10W
Cable port: Inner diameter: 30mm (right surface of the unit)
Exhaust opening: Inner diameter: 30mm (top surface of the unit)
Inner diameter: 30mm (back surface of the unit)
Intake opening Inner diameter: 30mm (right surface of the unit)
Temperature control system: PID control by micro computer (VI CR3 type)
Temperature setting system: Digital setting by up/down keys
Temperature display system: Digital display by orange LED
Other indications: Fluorescent character display of function
Timer display range: 0min to 99h59min, 100 to 999.5h
Operation mode: Fixed temperature operation, Auto start operation, Auto stop operation, Program operation (max. of 32 steps, repeat operation)
Additional functions: Timer, Clock, Total operating hours counter (max. of 49999h), Fan, Calibration offset
Temperature sensor: K-thermocouple for the temperature control device and the overheating prevention device
Internal dimensions (W×D×H mm): 600×500×500
External dimensions (W×D×H mm): 730×696×910
