Elcometer W182---4 아날로그 콘크리트 테스트 해머 (2.207 Nm, 단위 선택)
생산업체: ELCOMETER Model: W182---4 - 견적요구
- 연락처
Manufacture: Elcometer
Model: W182---4
Origin: England
Warranty: 12 month
Impact Energy: 2.207 Nm
Accuracy : Better than ± 2 Rebound Number(s) (When tested on Calibration Anvil at 80)
Resolution: 0.1 Rebound Number
Range: 10 to 70 MPa
Memory: 5000 tests
Unit Selection: N/mm2; MPa; kg/cm2; PSI
Autonomy (Continous Use): >5 Hours
Dimensions: Hammer: 280mm length x 55mm diameter; In Case: 190 x 100 x 350mm
Weight: 2kg (4.4lbs) with case
Packing List: Hammer 182, battery charger (UK, EUR & US), serial cable for PC, abrasive stone, instruction manual, calibration certificate and carry case
Elcometer 182 Digital Concrete Test Hammer
The Elcometer 182 Digital Concrete Test Hammer is equipped with an electronic transducer which converts the rebound values into a reading on the digital display.
It displays a range of statistics and there is a facility to download to a PC.
The software and digital display are integrated into the design of the hammer.
- Light and easy to use
- High resolution and accuracy
- Possibility to store measurements and download data to PC
- Setting of test parameters and factors (age, shape, correction factors)
- Rapid and simple calibration procedure
- Selection of testing angle
- Selection of unit (N/mm2, MPa, PSI, kgf/cm2) Automatic conversion of rebound index to equivalent compression strength
- Selection between 7 different correlation curves between rebound index and compressive strength, 2 pre-set and 5 user definable
- Statistical evaluation of test results (mean value, standard deviation, concrete strength estimation)
- Supplied with abrasive stone to prepare test surface
- Storage of up to 5,000 results
- RS 232 output to PC
- Rechargeable internal battery
Elcometer 182 Digital Concrete Test Hammer
Technical Specification
Part Number |
Description |
Certificate |
W182---4 |
Elcometer 182 Digital Concrete Test Hammer |
• |
Impact Energy |
2.207 Nm |
|
Accuracy |
Better than ± 2 Rebound Number(s) (When tested on Calibration Anvil at 80) |
|
Resolution |
0.1 Rebound Number |
|
Range |
10 to 70 MPa |
|
Memory |
5000 tests |
|
Unit Selection |
N/mm2; MPa; kg/cm2; PSI |
|
Autonomy (Continous Use) |
>5 Hours |
|
Dimensions |
Hammer: 280mm (11.02") length x 55mm (2.17") diameter In Case: 190 x 100 x 350mm (7.48" x 3.94" x 13.78") |
|
Weight |
2kg (4.4lbs) with case |
|
Packing List |
Hammer, battery charger (UK, EUR & US), serial cable for PC, abrasive stone, instruction manual, calibration certificate and carry case |
- 품질 보증
- 공인 보증
- 집으로 배달
- 간단하게 거래하기