OMEGA DRSL-TEMP DIN 레일 온도 루프 전원 신호 컨디셔너 (Thermocouple, RTD, J: -100 to 1200°C, K: -180 to 1372°C, Pt100: -200 to 850°C)

Width: 6.1 mm

Height: 113 mm

Length: 115 mm

Weight: 70 g

Mounting: DIN Rail 35 mm Standard, EN 60715

Approvals: CE, UL, RoHS

Isolation: 300 Vac

Stability: Load Stability: ≤0.01% of span/100 Ω

Input Type: Thermocouple, RTD

Wire Gauge: 26 to 12 AWG

EMC Standard: NAMUR NE 21

Installation: Pollution degree 2 and measurement/overvoltage category II

Output Value: Process

RTD Accuracy: ± 0.05 %

Voltage Loss: 5.5 Vdc

Accuracy Note: Thermocouple Input: Better than 0.5°C or ±0.05% of span (selected input range) RTD Input: Better than 0.1°C or ±0.05% of span (selected input range)

Output Detail: Programmable Signal Ranges:0 to 20 mA and 4 to 20 mA Range Limits (NAMUR NE43 Out of Range): Below 3.8 mA or above 20.5 mA Sensor Error Detection(Dip Switch Selectable forEnable or None): Below 3.5 mA or above 23 mA Incorrect DIP-Switch Setting Identification: Below 3.5 mA Output Error Level: DIP switch selectable for upscale or downscale

Output Signal: Current

Response Time: < 30 ms

Supply Voltage: 5.5 to 35 Vdc

Load Resistance: Resistance: ≤(Vsupply - 5.5)/0.023

Input Range Note: THERMOCOUPLE INPUT ;Sensor and Cable Specifications:5 kΩ per wire;Cold Junction Compensation (CJC): Internal or external (selectable); CJC Accuracy via External CJC (Pt100 RTD Sensor): Better than ±0.15°C; CJC via Internally Mounted Sensor: Better than ±2.5°C;Open Thermocouple Detection: Yes (DIP switch selectable upscale or downscale);Pt100 RTD INPUT;Sensor Current, RTD: <150 µA;Sensor Cable Specifications:50 Ω per wire;Effect of Sensor Cable Resistance (3 or 4-Wire RTD): <0.002 Ω/Ω;Broken Sensor Detection: >800 Ω;Shorted Sensor Detection: <18 Ω

Number of Inputs: 2

Wire Code Option: 2 -, 3 - , 4- Wire

EMC Immunity Note: NAMUR NE 21, A Criterion, Burst: <±1% of span (span = selected input range)

Electrical Output: 4 to 20 mA

Enclosure Ratings: IP20

Noise Calibration: >60 dB

Power Consumption: 0.7 W

Relative Humidity: 0 to 95% RH (non-condensing)

Supply Power Type: DC

Response Time Note: Response Time (0 to 90%, 100 to 10%): <30 ms/300 ms (selectable, provides either fast response or signal dampening as needed)

Screw Terminal Torque: 0.5 Nm

Thermocouple Accuracy: ± 0.05 %

Temperature Coefficient: Thermocouple : ≤±0.1°C/°C or ≤±0.01%/°C; RTD : ≤±0.02 °C/°C

Storage Temperature, Max: 85 °C

Storage Temperature, Min: -40 °C

Operating Temperature, Max: 70 °C

Operating Temperature, Min: -25 °C

Calibration Temperature, Max: 28 °C

Calibration Temperature, Min: 20 °C

Temperature Measurement Range: J: -100 to 1200°C, K: -180 to 1372°C, Pt100: -200 to 850°C