TEKTRONIX AFG31151 임의 함수 발생기 (150 MHz, 1 Channel, 2 Gsa/s)

Amplitude

Range (into 50 Ω) ≤ 200 MHz: 1 mVP-P to 5 VP-P

> 200 MHz to ≤ 250 MHz: 1 mVP-P to 4 VP-P

Output impedance 50 Ω

Load impedance setting Selectable: 50 Ω, 1 Ω to 10.0 kΩ, High Z (Adjusts displayed amplitude according to selected load impedance)

Isolation 42 Vpk maximum to earth ground

Short-circuit protection Signal outputs are robust against permanent shorts against floating ground

Overcurrent protection When incoming current is greater than 250 mA, the output channels are protected with relays that disconnect 

the AFG from the device under test. Connection can be resumed by user after removing the incoming current

Sine

Continuous mode 1 μHz to 150 MHz

Square: 1 μHz to 120 MHz

Ramp: 1 μHz to 1.5MHz

Pulse: 1 μHz to 120 MHz

Arbitrary waveforms: 1 mHz to 75 MHz

Modulation AM, FM, PM, FSK, PWM

Waveform memory size16 Mpts (128 Mpts optional) each channel

Run mode

Standard: Continuous

Optional: Sequence, Triggered, Gated

Number of waveform entries

Continuous, Triggered, Gated: 1 

Sequence: 1 to 256 

Minimum waveform length168 pts

Waveform granularity1 pt

Vertical resolution14 bits

Jump/trigger events External trigger (rising or falling edge), manual trigger, timer, SCPI commands

Repeat count1 to 1,000,000 or infinite

Timer range2 µS to 3600 S

Timer resolution 4 ns or 8 digits

Dimensions

Height191.8 mm (7.55 in.) Width 412.8 mm (16.25 in.) Depth143.3 mm (5.64 in.)

Weight

Net 4.7 kg (10.4 lb.) Shipping 7.0 kg (15.4 lb.)