EFT Generator Set LANGER EMV-Technik PT4 set

Các thông số kỹ thuật

Burst Transformer PT4

Điện áp nổ tối đa: 4.5 kV

Transformation ratio: 1:1

Độ bền điện môi của đầu ra: 500 V / DC, AC 50 Hz

Cung cấp bao gồm

1x PT4, Burst Transformer

1x BS 04DB-h, Nguồn từ trường

1x ES 05D-h, Nguồn điệnt rường

1x HV SHV-SMB 1 m, Cáp cao thế, SHV SMB

1x PT4, Phụ kiện

1x PT4, Hộp đựng

1x PT4 m, PT4 set Hướng dẫn sử dụng

Short description

The PT4 set is used to analyze immunity of assemblies and devices efficiently. The PT4 burst transformer converts the pulses of the EFT/burst generator into potential free burst pulses. These are injected into individual sections of the device under test, enabling the developer to locate its susceptible areas.

The set includes a magnetic and an electric field source which are also supplied by the EFT/burst generator. The field, which emerges from the head of the field source, is used to scan the surface of the device under test. This allows the weak spots to be located with precision and assigned to the fault patterns that occur in compliance tests.

The burst transformer and the connecting cable come with either an SHV plug (HV SHV-SMB 1 m) or a Fischer plug (HV FI-SMB 1 m). Please select the desired connector/plug when ordering.

Measurements taken with an oscilloscope during interfence are possible because the pulses from the burst generator are galvanically isolated. This allows for a significant reduction in faulty measurements despite possible interference.

Datasheet

Manual