Máy phân tích logic Leaptronix LA-2050 (32CH, 500Mhz) | EMIN.VN

Máy phân tích logic Leaptronix LA-2050 (32CH, 500Mhz)

Name: Máy phân tích logic Leaptronix LA-2050 (32CH, 500Mhz)
Brand: LEAPTRONIX

Có sẵn: 0 Cái

Hãng sản xuấtLEAPTRONIX

ModelLA-2050

Liên hệ

Số lượng

Thanh toán an toàn

Hỗ trợ chuyên nghiệp

Đổi trả dễ dàng

Giao hàng tận nơi

Phân tích thời gian: 500MHz
Phân tích trạng thái: 200MHz
Băng tần: 200MHz
Số kênh: 32CH
Bộ nhớ RA: 2M Bytes
Bộ nhớ sâu mỗi kênh: 1M bits x 32CH
Điện áp vào lớn nhất: ±15V
Ngưỡng:-4V～+4V
chức năng Trigger: Pattern / Edge / AND / OR
Chức năng đếm: 1~255 times
Pulse Width Trigger: YES
Glitch Capture: YES
Hiển thị: Màn hình 5.6 inch LCD màu (320 x 234)
Kết nối: USB 2.0
Nguồn: 110V AC～240V AC
Cuông suất tiêu thụ: 18W (20W Max)
Kích thước: 31cm x 15cm x 9cm
trọng lượng 3.8Ｋg
Cung cấp gồm:
1 máy chính
4 bộ dây đo
4 Bộ đầu kep
36 đầu kẹp (testing hook)
1 dây nguồn
1 CD x1 Driver Và HDSD
1 cáp USB

Stand-Alone Logic Analyzer Series

Provide the best measurement solution

Introduction

The LA-20 Series helps minimize users project risk by providing the most reliable, accurate data capture and a complete view of system behavior. These products are ideally suited for users on hardware/software debugging, parametric, mixed signal testing, and complex debugging.

Moreover, their compact size and ability to connect with a PC for analysis and data logging makes them an ideal solution at remote sites.

Features

Logic Analyzer :

External (synchronous) and internal (asynchronous) capture ꞉ Offer a more convenient environment for engineers.
Provide three sets of searching data functions and six cursor marks. The timing of each trigger point can be shown by the cursor mark.
Binary code and hexadecimal List mode (State) display.
Able to save measuring data and waveform results in stand-alone mode.
Offer I2C, SPI, UART and CAN signal decoding function on PC.
Provide various signal trigger and capture ꞉ Total of four kinds of trigger modes including Pattern/Edge/AND/OR.
Pre-trigger, post-trigger, 3 level trigger, and continued-trigger functions allow users to operate easily.
Bus analysis and glitch capture functions: 2M Bytes~4M Bytes long memory depth~each CH memory depth is up to 512 Kbits~1 Mbits.
The adjustable sample rate size can be set by users, which avoids long capturing time.
Provide "Trigger Counter" and "Pulse Wide Trigger" function.
High-speed Zoom In / Zoom Out techniques.
Smart software provides text file for saving the Binary Code of waveform results.
Compact, portable for engineers to perform debugging.
5.6 inch TFT color LCD display.
USB 2.0 interface for PC link function, which can connect with PC for user to save, analyze, view and printout.

Data Logger

Provide friendly software, no matter what program language, just key in the timing,trigger condition and logic level etc, then start the data acquisition.
Use binary for logging the code.

Specification

	LA-2025	LA-2050
Timing Analysis	250MHz	500MHz
State Analysis	200MHz	200MHz
Bandwidth	200MHz	200MHz
Channels	32CH	32CH
RAM Size	2M Bytes	4M Bytes
Storage Depth per Channel	512K bits x 32CH	1M bits x 32CH
Maximum Input Voltage	±15V	±15V
Threshold Range	-4V～+4V	-4V～+4V
Data Skew (Channel to Channel)	4ns typical (4ns Max)	2ns typical (2ns Max)
Trigger Condition	Pattern / Edge / AND / OR	Pattern / Edge / AND / OR
Trigger Counter	1~255 times	1~255 times
Pulse Width Trigger	YES	YES
Glitch Capture	YES	YES
Display Measure Communication	5.6 inch Colored LCD (320 x 234) USB 2.0	5.6 inch Colored LCD (320 x 234) USB 2.0
Power Source	110V AC～240V AC	110V AC～240V AC
Frequency Range	50～60Hz	50～60Hz
Power Consumption	18W (20W Max)	18W (20W Max)
Operating Temperature	0℃～45℃	0℃～45℃
Dimension	31cm x 15cm x 9cm	31cm x 15cm x 9cm
Weight	3.8Ｋg	3.8Ｋg