For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0

Blog

What is the typical Shore A hardness of rubber? Does it change with temperature?
11/08/y 10:11:49

Industrial rubber typically falls within the 40–80 Shore A range, though there is no single standard hardness for all types; components such as gaskets, seals, vibration dampers, and rollers may utilize different hardness levels depending on specific requirements. Temperature also significantly affects measurement results: heated rubber tends to soften—lowering the Shore A value—while cold rubber tends to harden, causing the Shore A reading to rise.

Why Oscilloscope Amplitude Reads Lower Than the Real Value
11/08/y 09:53:18

An oscilloscope can display less amplitude than the actual signal when its bandwidth is too close to the measured frequency. Understanding the -3 dB point, harmonic content, bandwidth limits, and rise time helps prevent misleading waveform measurements.

What Is Oscilloscope Memory Depth ?
11/08/y 09:50:22

Memory depth determines how many data points an oscilloscope can store during a single acquisition. This parameter directly affects the actual sampling rate, observation time, and the ability to capture and analyze abnormal events.

Hall Camshaft Sensor Testing with the OWON VDS2064
11/08/y 09:30:50

189 Testing the camshaft Hall sensor using the OWON VDS2064 oscilloscope enables technicians to capture, display, and analyze waveforms directly on a computer during automotive electrical diagnostics.

ຕິດຕາມຂ່າວສານ ແລະ ຂໍ້ສະເໜີ

ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.

ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.

ການຊ່ວຍເຫຼືໍາດ່ວນ

ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ