ຂ່າວ EMIN

An alarm from a multi-gas detector does not always indicate the presence of toxic or combustible gases in the work area. In some cases, the cause may be related to the instrument itself or the surrounding environmental conditions.

E10 bioethanol fuel, containing 10% ethanol, is becoming increasingly popular in fuel distribution systems. Quality control of this fuel requires measuring equipment that meets stringent technical standards. This article guides technicians on how to use specialized equipment at EMIN to address inaccurate readings

Perpendicularity inspection is a routine task in machining, machine assembly, and quality control. Two of the most commonly used tools for this purpose are steel engineer's squares and granite squares.

Since E10 bioethanol fuel began to be more widely distributed on the market, many people have been interested in its compatibility with engines, fuel consumption, and actual driving experience. From a technical perspective, the quality of a liter of E10 fuel is assessed through a series of strict criteria before it appears at gas stations

Machine vibration after assembly is not always related to the motor, bearings or drive system. In many cases, the root cause can be traced to very small geometric deviations introduced during the machining and assembly processes.

In recent days, with the increasing use of E10 gasoline, many motorcycle forums have seen reports of engine hesitation, slow acceleration, or even engine stalling after refueling with the new fuel. This has led many motorcycle owners to question whether E10 gasoline is actually the cause of these problems.

When discussing automation, electronics, or modern technological infrastructure, attention is often focused on controllers, sensors, or end devices. However, for these systems to operate stably over the long term, the power supply is always an inseparable part.

Among the equipment that EMIN will showcase at VIMF Binh Duong 2026, the Chauvin Arnoux C.A 8345 is a standout product in the power quality analysis and industrial load monitoring group

At VIMF Binh Duong 2026, EMIN will showcase a range of signal measurement and analysis equipment for R&D, electronics manufacturing, and automation. Among them, the Tektronix MSO44B has attracted considerable attention from visitors since its product list was first announced

When selecting an square, you will often encounter two widely recognized standards: DIN 875 and JIS B7526. So, what are the differences between these standards, and where are they applied?