ຂ່າວ EMIN

A practical guide to Barcol hardness testing for rigid plastics and soft metals, from selecting a test location to verifying readings.

A practical guide to maintaining a coating thickness gage through planned calibration checks, careful probe handling, cleaning, and proper storage.

Learn about the PosiTector GLS Surface Gloss Meter

A practical overview of inspection points for polyurea coatings on steel, concrete, and other substrates, including surface profile, climate, thickness, and adhesion.

Using a coating thickness gauge helps identify wear on an OPC printer drum rather than relying solely on visual inspection of the surface. The service life of an OPC drum is often considered to have significantly declined when the coating has worn by approximately 5 to 15 μm. When the wear approaches half of the original coating thickness, the drum may be removed from service depending on the remanufacturer’s quality control procedures.

A practical guide to selecting a conformal coating thickness measurement approach for printed circuit boards based on substrate construction, available access, and coating requirements.

Erosion and corrosion can gradually reduce the material thickness of pipelines, storage tanks, boilers, pressure equipment, and various other industrial structures. Ultrasonic thickness gauges also provide the basis for identifying areas of wall thinning, planning inspections, and supporting maintenance decisions.

A practical overview of measuring blanket, packing, and plate thickness on offset presses, including non-destructive measurement considerations and probe selection.

An ultrasonic coating thickness gauge helps control the thickness of lacquer coatings on guitars with wood or graphite substrates without damaging the surface.

Ultrasonic measurement helps determine the remaining thickness of acrylic windows from one side, supporting wear monitoring and aircraft window refurbishment. An ultrasonic thickness gauge enables inspection without removing the window or requiring mechanical measurement from both sides. Measurements can be performed from one side of the surface when the probe is properly coupled to the material.