ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Measuring Range: 3 – 2000 cN
Resolution: 1 cN
Measuring Head Width*: 38 mm
SCHMIDT Calibration Material: PA: 0.50 mm Ø***
Calibration: According to SCHMIDT factory procedure
Accuracy: ±1 % full scale ±1 digit or better; typical ±0.5 % full scale
Measuring Units: cN, g, N or lb, switchable
Overrange: Approx. 10 % full scale, without accuracy guarantee
Overload protection: 200 % full scale
Measuring principle: Strain gauge bridge
Measuring roller deflection: Max. 0.5 mm
Signal processing: Digital
Damping: Adjustable electronic damping, averaging
Sampling rate internal: Approx. 1 kHz
Sampling rate: Max. 200 Hz (200 readings/sec)
Display: Colour-TFT 128 x 160
Display update rate: Approx. 2 times per second
Memory: Last, average, MAX and MIN
Temperature coef ficient : Gain: less than ± 0.01% full scale/°C
Temperature range: 10 – 45 ºC
Air humidity: 85 % RH, max.
Power supply: LiPo accumulator (approx. 20 h continuous use, charging time approx. 3.5 h), USB AC adapter 100 – 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ)
Housing material: Aluminium
Dimensions: See Dimensions
Weight, net (gross): Approx. 310 g (1220 g)
Additional specifications of model ETX
Output signal: USB
Memory: Max. 60000 at 999 measuring periods
Memory Modes: 5 memory modes with statistical evaluation and PEAK capture
* Outer distance between outside guide rollers
** Suitable for 95 % of applications – PA = Polyamide Monofilamente, calibrated with a running filament approx. 100 m/min
*** Suitable for 95 % of applications – PA = Polyamide Monofilamente, calibrated with a static filament
Delivery Includes: carrying case, USB AC adapter with 4 adapters (EU/USA/UK/AUS-NZ), USB cable, a screwdriver and flat wrench, operating instruction in German or English (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of charge. Tension meter ETX includes additionally software »Tension Inspect 3«
