Bộ dung dịch bảo quản đầu dò pH/ORP MILWAUKEE pH-Main (230 mL; 4pcs)

Độ chính xác hiệu chuẩn pH: Chuẩn ±0.01 pH

Giá trị pH: @25°C 4.01 và 7.01

Quy cách đóng gói: Chai

Dung tích: 230 mL

Số lượng: 4

Chứng nhận phân tích (COA): Không

Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.

PH-MAIN kit is set of storage and cleaning solutions designed to extend the life of your pH or ORP electrode. Keeping your sensor clean during calibration and measurement ensures accurate and repeatable readings.

Included in the kit is storage solution (MA9015) and pH cleaning solution (MA9016) for pH/ORP electrodes. Both bottles are 230 mL.

In general, and depending on the frequency of use and the type of application, soak your pH or ORP electrode once per week in MA9016 Cleaning Solution for about 15 minutes. After soaking, remove the electrode, rinse with Distilled Water and put the MA9015 Storage Solution in the probe cap before storage. This will keep your pH or ORP sensor hydrated for the next use as the sensor needs to be hydrated for the ion exchange process to occur.

If the probe sensor should become dry, storage solution can be used for reconditioning.

Design Features

Storage and cleaning solutions are lab grade produced with premium chemicals

Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings

Sealed against light with air tight, tamper proof cap

Marked with lot numbers and expiry dates

230 mL bottles

Included

MA9015 Electrode cleaning solution (230 mL)

MA9016 Electrode storage solution (230 mL)