Điện cực pH/EC/TDS kết hợp MILWAUKEE SE-600 (0 - 13 pH; 1m cáp)

Thân: Polypropylene

Điện cực tham chiếu: Loại đơn, Ag/AgCl (bạc/bạc clorua)

Mối nối: Vải

Dung dịch điện phân: Dạng gel

Dải đo pH: 0–13 pH

Dải nhiệt độ: 20–40°C (68–104°F)

Đầu đo: Hình cầu

Áp suất tối đa: 0.1 bar

Chiều dài: 3.8 inch (~9.65 cm)

Chiều dài cáp: 7 chân / 3.3 feet (~1 mét)

Kết nối: DIN

The SE600 probe is designed for use with the Milwaukee MW801 and MW802 PRO 3-in-1 pH, EC, TDS Combo Meters.

Design Features

The Milwaukee lets you easily and accurately test pH, conductivity and total dissolved solids (TDS) using an integrated probe.

Top features include:

Double Junction

The double junction design reduces risk of clogging.

Gel filled

Using a gel removes the need to maintain the electrolyle levels.

Resin body

The resin body is highly durable, chemically resistant and protects against accidental damage.

Care and Use

The SE600 Combo electrode includes both a pH and EC electrode. Both need maintenance.

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your PRO pH Tester will give your fast, accurate results for longer.

EC sensors are more robust but can still be affected by residue build up.

Here are our top four tips.

1. Always store with the cap full of buffer or storage solution not water.

2. Clean your Tester regularly by soaking in cleaning solution.

3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH and EC sensor.

4. Gently stir the PRO Tester in the sample for a faster result.

5. Rinse in water after every test.