emin

Cờ lê đo lực loại số Mountz MTBN65-SW (020633) ( 10 - 65 N.m;Tín hiệu đầu ra đo lực Break-Over )

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Hãng sản xuất : Mountz
Model : MTBN65-SW
Item : 020633
Xuất xứ: Mỹ
Bảo hành : 12 tháng

Kích thước driver: 16mm Spigot
Break: 20°
Dải lực xoắn: 89 - 575 lbf.in/ 102 - 663 kgf.cm/ 10 - 65 N.m
L =  452 mm
Trọng lượng: 1.09 kg

datasheet

manual

FEATURES:
The Signal Output torque wrench is a process control tool that sends a signal each time the wrench achieves its pre-set torque value. The torque wrench is ideal for production line control or counting function. The cable from the tool is connected to the customers PLC or error proofing system.
Designed and manufactured to meet or exceed the accuracy and repeatability requirements of ISO 6789:2003
(Tools < 10 N.m (+/- 6% of setting): MTBN2-SW, MTBN10-SW, TSP5/45-SW, TSP10/90-SW
(Tools > 10 N.m are +/- 4% of setting): MTBN25-SW, MTBN65-SW, MTBN135-SW, TSN25D-SW, TSN25A-SW, TSN55-SW, TSN125-SW
The torque wrenches are fitted with a Universal Rotary Switch Module (360 rotating connector prevents twisting or kinking of the cable), which signals when a pre-set torque value is reached.
Signal Output Wrenches can be connected to a Signal Delay Unit (accessory item) to monitor the use of the wrenches as the electrical signal is displayed each time the wrench achieves its pre-set torque value.
Micro-switch contained in internal shock-resistant housing.
Possible use in Production Line Control: Allowing only components with correctly torque fasteners to pass through a work station. This could be a simple matter of actuating a gate switch or signaling a computer controlled work station.
Counting Function: Count the number of times the torque has been applied - check against finished goods.
Possible Uses
- Production Line Control: Allowing only components with correctly torque fasteners to pass through a work station. This could be a simple matter of actuating a gate switch or signaling computer controlled work station.
- Counting Function: Count the number of times the torque has been applied – check against finished goods


Đăng ký nhận bản tin - cơ hội nhận khuyến mãi