For full functionality of this site it is necessary to enable JavaScript.

Cảm biến dùng cho máy đo mô men xoắn Mountz RTSX100i (170205) (113 - 1130 cN.m; 1/4 Male/Square)

Kiểu driver vào: 1/4 Female/Square
Kiểu driver ra: 1/4 Male/Square
Dải lực xoắn : 10 - 100 lbf.in / 113 - 1130 cN.m
Định mức đầu ra: </= 6 Nm [53 lbf.in] lực xoắn định mức 1 mV/V > 6 Nm [53 lbf.in] rated torque 2 mV/V
Tính hoán đổi: nối mv/v và hiệu chuẩn chuyển hướng +0.3% FS
Phi tuyến tính: +0.2% FS
Kích từ cho phép: 10V DC or AC RMS
Điện trở cầu: 350 ohms
Quá tải an toàn: 125% của đầu ra định mức

Chi tiết

datasheet

manual

FEATURES:
The Rotary Torque Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.
Use torque sensor with most hand tools, power tools or rotational measurement applications.
Connects between the power tool and the joint. Monitors actual torque being applied from the driver to the fastener.
Features “ARC II” technology, an instant auto-recognition system of the RTSX connected to the FTA-100, PTT or LTT.
Bi-directional.
Accuracy ± .25% of full scale*.
Note: * This is the stand alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer (FTA-100, PTT or LTT).

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi