Temperature Input Device NI USB-TC01 (Device Only, 4 S/s, ±73.125 mV)

NI USB-TC01 (Device Only)

Warm-Up Time

Recommended warm-up time 15 minutes

Input Characteristics

Number of channels: 1

ADC resolution: 20 bits

Input range: ±73.125 mV

Common-mode range, Channel-to-USB ground: ±30 V

Common-mode rejection ratio (0 to 60 Hz), Common-to-USB ground: >145 dB

Noise rejection (50/60 Hz): >80 dB

Temperature measurement ranges: Works over temperature ranges defined by NIST (J, K, R, S, T, N, E, and B thermocouple types; the E type has a maximum limit of 900 °C.)

Conversion time: 250 ms

Sample rate: 4 S/s, maximum, software-timed

Input bandwidth (-3 dB) :1 Hz

Differential input impedance: 20 MΩ between isolated 3.3 V and ground

Input noise: 2 µVpp

Open thermocouple bias voltage: 3.3 V

Cold-junction compensation sensor accuracy, 0 °C to 65 °C: 1.25 °C maximum, 0.6 °C typical

Cold-junction compensation sensor resolution: 0.0625 °C typical

Overvoltage protection: 30 V max between TC+ and TC

Takes temperature measurements from several types of thermocouples in a small, portable form factor.

The Temperature Input Device is a thermocouple measurement device featuring InstantDAQ technology. InstantDAQ technology includes built-in software for viewing and logging data that automatically loads when you plug in the device, so you can instantly take temperature measurements with your PC. You can connect the Temperature Input Device to any USB port to use your PC as a display and monitor data in real time. The device is compatible with J, K, R, S, T, N, E, and B thermocouples.The Temperature Input Device includes the NI-DAQmx driver and configuration utility that simplify configuration and measurements. NI-DAQmx supports NI programming environments as well as Python, ANSI C, C#.NET, and MathWorks MATLAB® software.

Datasheet