Gông từ kiểm tra khuyết tật NOVOTEST MPD-DC (22kg; 350mm)

Cường độ từ trường tại khoảng cách giữa hai cực: 200 kA/m

Cường độ từ trường trong không khí giữa tâm các đầu cực nam châm: ≥65 kA / m

Lực nâng: ≥22 kg (50 pounds)

Khoảng cách giữa hai cực: 350 mm

Trọng lượng: ≤0.6 kg

Kích thước – hình trụ – lõi từ trường: 40*120*360 mm

Description:

- Magnetic Flaw Detector (Magnetic Yoke) NOVOTEST MPD-DC applies in circumstances where the electric equipment mustn’t be used or prohibited by the rules.

- Device is used during magnetic particle inspection (where it is applicable) according to ASTM E 709, ASTM E 1444, ASME Section V Article 7 and MIL-STD-1949.

- Magnetic Flaw Detector NOVOTEST MPD-DC is used to detect surface and subsurface cracks of all kinds (flake, lack of fusion welded joints, tears etc.) in structures made of ferromagnetic materials.

- The device has two permanent magnets placed in a cylindrical shells, which are connected by a flexible magnetic wire, so it can be used for MPI of remote locations, corner welds and other products of various shapes and sizes.

Advantages:

Magnetic Flaw Detector NOVOTEST MPD-DC can be used in cases if user can not use electromagnets, when supply of power is difficult or restricted by rules of safety (during works at height; working in the field conditions; testing of internal surface of tanks, boilers; etc.) at operating temperature from 30 °C  below zero to 50 °C  above zero and relative humidity up to 95% at 35 °C 

Datasheet

Manual

VIDEO