Máy đo độ cứng kiểu siêu âm và tác động NOVOTEST T-UD2 (UCI & Leeb probe)

Đầu dò UCI: 1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N) 22lbf

Đầu dò Leeb: tương thích kiểu D, DC, DL, C, D + 15, E, G

Thang đo độ cứng:

- Đầu đo UCI: HRC, HB, HV, MPa

- Đầu đo Leeb: HRC, HB, HV, HLD, MPa

Dải đo độ cứng:

+ Rockwell, HRC: 20 ~ 70

+ Brinell, HB: 90~650

+ Vickers, HV: 240~940

+ MPa: 370 ~ 1740

Dải đo có thể được điều chỉnh bởi người dùng VD: 1 – 2000HV)

Độ chính xác: ±15HV, ±2HRC, ±10HB, ±4HLD

Hướng đo: Hướng bất kỳ 360 °

Vật liệu

+ UCI probe-pre-calibrated cho thép.

+ Leeb probe-pre-calibrated cho thép, thép hợp kim, gang, thép không gỉ, nhôm, đồng, đồng thau, đồng.

+ Vật liệu tùy chỉnh bổ sung cho chuẩn.

Môi trường hoạt động: Nhiệt độ: -20°C ~ 50°C, Độ ẩm: <95% R.H. at 35°С

Nguồn điện: 2 pin AA/ Sạc AA

Kích thước: 122х76х37 mm

Trọng lượng của đơn vị điện tử với pin: 0,25 kg

Tuổi thọ pin: 20 h

Cung cấp bao gồm: Máy chính; đầu dò UCI; đầu dò Leeb D; 2 pin; sạc; Cáp USB; hướng dẫn sử dụng, phần mềm cho PC và hộp đựng

Chọn mua thêm khối chuẩn

Option Rockwell Hardness Test Block HRC (HRA orHRB)

Option Brinell Hardness Test Blocks HB

Option Vickers Hardness Test Blocks HV

Option Leeb Hardness Test Block (type D

Option Leeb Hardness Test Block (type G)

Descriptions:

- The Combined Hardness Tester NOVOTEST T-UD2 combines the advantages of two methods: UСI  (ASTM A1038) and Leeb (ASTM A956), which makes it possible to solve almost any task of operational hardness testing. With this device, the user will be able to measure the hardness of both a large products with a rough surface and a small samples of complex shape and with a thin wall.

- This modification of the device has all functions for working with various materials and scales, which makes it an optimal device for non-destructive testing of metal hardness.

The device can be equipped with a Bluetooth module!

- Do hardness measurements, calibrate the device, set up a convenient display of values, save the results of hardness measurements, synchronize the archive with your other devices and a PC, transfer measurement results to your colleagues – all this is available with your smartphone thanks to the special NOVOTEST app for Android.

- Using a Bluetooth connection, your smartphone connects to the hardness tester and you have a completely new device – a new generation hardness tester! The intuitive interface, ample opportunities for documenting results, Internet access, touch screen, camera, microphone and GPS receiver of a smartphone turn your hardness tester into something completely unique and previously inaccessible.

The main advantages of the Combined Hardness Tester NOVOTEST T-UD2 are:

- 2 removable probes: ultrasonic contact impedance  (UCI) and dynamic, rebound (Leeb)

- There are almost no restrictions for hardness testing (by weight, configuration, structure, degree of mechanical and thermal treatment, etc.)

- To evaluate changes in the hardness of the hardened layer depth articles and the effect of surface stress

- Wide range of hardness value

- Convenience and ease in operation

- Graphical contrast display with backlight

- Automatic recognition of probe

- Extended temperature range (cold-resistant, down to -20 °C)

- Device has internal memory and allows user to transmit data to PC

Option

- Standard Set of Rockwell Test Blocks HRC (3 pc. In set)

- Standard Set of Brinell Test Blocks HB (3 pc. In set)

- Standard Set of Vickers Test Blocks HV (3 pc. In set)

- Leeb Hardness Test Block (1 pc. In set)

VIDEO REVIEW

UCI probe application

Calibration UCI probe of Combined Hardness Tester T-UD2 (T-U2)