Bộ điều khiển quá trình Ramp & Soak 4 và 7 kênh đầu vào đa năng 1/8 DIN OMEGA CN1504MV-2 (4 Digit LED, 1/8 DIN)

Reset: 0.00 to 50.00 repeats/minute

Scale: Programmable, 1 to 30,000

Offset: 0 to 100 mV, 0 to 10 mV, 0 to 20 mA

Weight: 992 g

Accuracy: ± 0.05 %

Frequency: 50/60 Hz

Scan Rate: 2 channels/sec (non-adjustable)

Input Type: mV

Resolution: None

Form factor: 1/8 DIN

Front Bezel: 65 H x 117 W x 178 D mm

Display Size: 10 mm (.39 in)

Display Type: 4 Digit LED

Output Detail: 5 Volts drive @ 50 mA open collector

Ramp and Soak: 7-segment programmable for each channel

Control Output: N/A

Data Interface: N/A

Supply Voltage: 12 Vdc

Input Type Note: J, K, T, E, R, S, B, thermistor, RTD, 4 to 20 mA loop current, 0 to 10 Vdc, and 0 to 100 mV

Measuring Range: Millivolt: 1 to 30000

On/Off Deadband: Programmable, 0 to FS

Current Accuracy: ± 0.05%

Measurement Type: Current, Voltage

Number of Inputs: 4

Voltage Accuracy: 0.0005

Cutout Dimensions: 45 x 22 mm

Display Type Note: Red, 4 Digit 7-segment Single LED display Display Test: “8.8.8.8.8.8.8.” on power-up

Number of Outputs: 1

Proportional Band: 0 to 100% of span

Supply Power Type: DC

Cold Junction Error: ±0.5°C (10 to 45°C)/±0.9°F (50 to 113°F)

Channel Display Time: Programmable, 1 to 999 seconds

Additional Features 1: 4-Zone Controller

Datasheet