Đồng hồ Nhiệt độ/Quy trình lập trình được 1/32, 1/16, 1/8 DIN OMEGA DPIS8-EIT (1/8 DIN, 4 Digit LED)

CMRR: 120 dB

NMRR: 60 dB

Width: 96 mm

Height: 48 mm

Length: 127 mm

Weight: 295 g

Accuracy: ± 0.03 %

Polarity: Unipolar

Approvals: UL, C-UL, UKCA, CE per 2014/35/EU

Frequency: 50 to 400 Hz

Isolation: Power to Input/Output: 2300 Vac per 1 minute test For Low Voltage Power Option: 1500 Vac per 1 minute test Power to Relay/SSR Output: 2300 Vac per 1 minute test Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test RS232/485 to Input/Output: 500 Vac per 1 minute test

Input Type: Analog Current/Voltage, Strain

Resolution: 10/1µV

Form factor: 1/8 DIN

Display Type: 4 Digit LED

Reading Rate: 3/sec

Accuracy Note: 0.03% reading;Universal Strain/Process Input Models;Process Voltage Accuracy: 0.03% rdg;Process Current Accuracy: 0.03% rdg

Configuration: Single-ended

Display Range: -1999 to 9999

Input Current: 0 to 20 mA (5 Ω load)

Input Voltage: 0 to 100 mVdc, -100 mVdc to 1 Vdc, 0 to 10 Vdc

Output Detail: Relay: 250 Vac or 30 Vdc @ 3 A (resistive load); configurable for on/off, PID, and ramp and soak Output 1: SPDT, can be configured as an alarm 1 output Output 2: SPDT, can be configured as an alarm 2 output SSR: 20 to 265 Vac @ 0.05 to 0.5 A (resistive load); continuous DC Pulse: Non-isolated; 10 Vdc @ 20 mA Analog Output (Output 1 Only): Non-isolated, proportional 0 to 10 Vdc or 0 to 20 mA; 500 Ω max Output 3 Retransmission Isolated Analog Voltage and Current Current: 10 V max @ 20 mA output Voltage: 20 mA max for 0 to 10 V output

Sampling Rate: 3 Hz (3 updates/second)

Step Response: 0.7 sec for 99.9%

A/D Conversion: Dual slope

Control Action: Action: Reverse (heat) or direct (cool)

Control Output: SPDT Relay, Alarm

Data Interface: Ethernet

Digital Filter: Programmable

Supply Voltage: 90 to 240 Vac

Impedance Input: 10 MΩ for 100 mV ;1 MΩ for 1 or 10 Vdc

Measuring Range: Universal Strain/Process Input Models;Process Voltage: 0 to 100 mV, 0 to 1V, +100 mV, 0 to 10V;Process Current: 0 to 20 mA (4 to 20 mA)

Span Adjustment: 0.001 to 9999 counts

Thermal Effects: -1999 to 9999

Number of Inputs: 1

Cutout Dimensions: 45 mm

Decimal Selection: 3-Position

Enclosure Ratings: NEMA Type 1

Relative Humidity: 0.9

Supply Power Note: 90 to 240 Vac ±10%, 50 to 400 Hz*, 110 to 300 Vdc, equivalent voltage

Supply Power Type: AC

Data Interface Note: Ethernet: Standards compliance IEEE 802.3 10 Base-T RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status Supported Protocols: TCP/IP, ARP, HTTPGET RS485: Addressable from 0 to 219

Linearization Points: Up to 10

Additional Features 1: Programmable 3 Color Display

Electrical Connection: Screw Terminal

Retransmission Output: N/A

Temperature Stability: 50 ppm/°C

Sensor/Transmitter Power: 5 Vdc @ 40 mA, 10 Vdc @ 60 mA

Operating Temperature Note: 0 to 55°C (32 to 131°F) 90% RH non-condensing

Operating Temperature, Max: 55 °C

Operating Temperature, Min: 0 °C

Sensor/Transmitter Power Note: 5 Vdc @ 40 mA; 10 Vdc @ 60 mA (Optional In Place Of Communication)

Datasheet