Bộ cách ly cấp nguồn vòng lặp đầu vào ray DIN với các mẫu 1 hoặc 2 kênh OMEGA DRSL-LPI-2 (Current, 0 to 20.5 mA)

Width: 6.1 mm

Height: 113 mm

Length: 115 mm

Weight: 70 g

Accuracy: ±10 µA + 0.05 %

Mounting: DIN Rail 35 mm Standard, EN 60715

Approvals: CE, UL, RoHS

Bandwidth: 100 Hz

Isolation: Isolation Voltage (Test): 2.5 kVac ;Isolation Voltage (Working):300 Vac

Stability: Load Stability: ≤0.01% of span/100 Ω

Input Type: Current

Wire Gauge: 26 to 12 AWG

EMC Standard: NAMUR NE 21

Installation: Pollution degree 2 and measurement/overvoltage category II

Output Value: Process

Voltage Loss: (Unit voltage drop) + Vout

Output Detail: Output Load: 600Ω max Output Load Stability: <0.01% of span/100 Ω (span = 0 to 20 mA) Voltage Limit: 17.5V

Output Signal: Current

Response Time: < 5 ms

Conversion Rate: 1:1

Input Range Note: Current; Signal Conversion: 1 to 1; Functional Range: 0 to 23 mA (NAMUR NE43 compliant); Start up Current: 10 µA typical; Input Overload: 50 mA max; Input to Output Voltage Drop:1.25V + (0.015 x Vout)where Vout = Iout x Routput, typical; Input Voltage Drop:(Unit voltage drop) + Vout

Number of Inputs: 2

EMC Immunity Note: Extended EMC Immunity NAMUR NE 21, A Criterion, Burst: <±1% of span

Electrical Output: 0 to 20 mA

Enclosure Ratings: IP20

Noise Calibration: >60 dB

Power Consumption: 30 mW

Relative Humidity: 0 to 95% RH (non-condensing)

Supply Power Type: Loop Powered

Response Time Note: Response Time (0 to 90%, 100 to 10%): <5 ms

Screw Terminal Torque: 0.5 Nm

Temperature Coefficient: ≤±2 µA/°C

Storage Temperature, Max: 85 °C

Storage Temperature, Min: -40 °C

Current Measurement Range: 0 to 20.5 mA

Operating Temperature, Max: 70 °C

Operating Temperature, Min: -25 °C

Calibration Temperature, Max: 28 °C

Calibration Temperature, Min: 20 °C

Datasheet