Cảm biến rời rạc trạng thái rắn trong vỏ transistor OMEGA PX4600-100AV (Absolute, 100 psi, Stem, 3/16 in)

MTBF: 100,000 hours

Shock: 100 g, 11 ms, half sine wave without damage

Weight: 5 g

Accuracy: ± 0.25 %

Vibration: At 35 g peak sinusoidal vibration from 10Hz to 2000 Hz {½" D.A.), the output shall not exceed 0.04% FSO/g for 15 psi range, decreasing to 0.005% FSO/g for 100 psi and above. Natural Frequency: >35 kHz for 100 psi range

Accuracy Note: ± 0.25% FSO combined lineartiy, hysteresis, and repeatabiltiy

Output Signal: Millivolt

Pressure Type: Absolute

Pressure, Max: 100 psi

Pressure, Min: 0 psi

Accuracy Class: 0.1% to 0.25%

Burst Pressure: 3x Full Scale

Proof Pressure: 2.5x Full Scale

Supply Voltage: 10 Vdc

Sensing Element: 4-active-arm Strain Gauge Bridge

Input Resistance: 2000 Ω

Electrical Output: 30 mV/V

Materials, Wetted: Epoxy, Kovar, Nitride, Pyrex glass

Output Resistance: 1000 to 1500 Ω

Zero/Balance Error: 0 mV ± 5% FSO

Burst Pressure Note: 300% rated pressure, 500 psi max

Proof Pressure Note: 250% rated pressure, 500 psi max, will not cause changes in performance beyond specified tolerance

Sensing Element Note: 4-active-arm Bridge using a micro-machined diffused silicon diaphragm sensor and thin-film media and dielectric isolation barriers.

Electrical Connection: T-08

Insulation Resistance: 100 MΩ @ 50 Vdc

Electrical Output Note: 30 mV ± 10%@ 10 Vdc

Process Connection Size: 3/16 in

Process Connection Type: Stem

Operating Temperature, Max: 150 °C

Operating Temperature, Min: -55 °C

Compensated Temperature, Max: 121 °C

Compensated Temperature, Min: -55 °C

Thermal Effect on Span error, Max: ± 0.036% FSO/°C

Thermal Effect on Zero error, Max: ± 0.036% FSO/°C, ± 0.036% FSO/°C

Datasheet