Ứng dụng : Kết nối trực tiếp với máy tính để đo.Kết quả hiện thị trên máy tính.
Băng thông : 60Mhz
Số kênh : 2 + 1 (Multi)
Tốc độ lấy mẫu : 500MS/s
Thời gian quét : 5ns/div ~ 100s/div
Rise time : <=5.8ns
Độ dài ghi : 10M
Input Coupling : AC, DC, GND
Trở kháng : 1MΩ±2%，10pF±5pF
Kênh : 50Hz : 100 : 1, 10MHz : 40 : 1
Điện áp vào max : 40V (PK - PK) (DC+AC, PK - PK)
Độ chính xác khuếch đại : +-3%
Độ chính xác DC : Average≥16: ±(3% reading + 0.05div) for △T
Que đo : 1X, 10X, 100X, 1000X
Độ phân giải : 8 bít
Độ nhạy điện áp : 5mV/div～5V/div
Kiểu Trigger : Edge, Pulse, Video, Slope, Alternate
Chế độ Trigger : Auto, Normal, Single
Đo tự động : Vpp, Vavg, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot,
Rise Time, Fall Time, Delay A→B↑, Delay A→B↓, +Width, -Width, +Duty, -Duty
Tính toán : ＋, －, ×, ÷, FFT
Truyền thông : USB 2.0
Giao tiếp đa chức năng : Đồng bộ đầu vào, đầu ra, Pass/Fail, kích ngoài. Level chuẩn : TTL
Công suất : <5W
Khối lượng : 0.3Kg
Phụ kiện : QUe đo, cáp USB, HDSD
Model VDS1022I VDS1022 VDS2062 VDS2064 VDS3102 VDS3104 Bandwidth 25MHz 60MHZ 100MHZ Channel 2+1 (multi) 4+1 (multi) 2+1 (multi) 4+1 (multi) Sample Rate 100MS/s 500MSa/s 1GSa/s Horizontal Scale (s/div) 5ns/div～100s/div, step by 1～2～5 2ns/div~100s/div, step by 1～2～5 Rise Time ≤14ns ≤5.8 ns ≤3.5 ns Record Length 5K 10M 5M 10M 5M Input Coupling DC AC GND Input Impedance 1MΩ±2%，in parallel with10pF±5pF Channels Isolation 50Hz : 100 : 1, 10MHz : 40 : 1 Max Input Voltage 400V (PK - PK) (DC+AC, PK - PK) 40V (PK - PK) (DC+AC, PK - PK) DC Gain Accuracy ±3% DC Accuracy Average≥16: ±(3% reading + 0.05div) for △T Probe Attenuation Factor 1X, 10X, 100X, 1000X LF Respond (AC, -3dB) ≥5Hz (at input, AC coupling, -3dB) Sampling Rate / Relay Time Accuracy 150ps Interpolation sin(x) / x Interval (△T) Accuracy (full bandwidth) Single: ± (1 interval time + 100ppm × reading + 0.6ns),
Average >16: ±(1 interval time + 100ppm × reading + 0.4ns) Vertical Resolution (A/D) 8 bits resolution (2 channels simultaneously) Vertical Sensitivity 5mV/div～5V/div Trigger Type Edge, Pulse, Video, Slope, Alternate Trigger Mode Auto, Normal, Single Trigger Level ±5 divisions from screen center Acquisition Mode Sample, Peak Detect, and Average Line / Field Frequency (video) NTSC, PAL, and SECAM standard Cursor Measurement △V, and △T between cursors Automatic Measurement Vpp, Vavg, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot,
Rise Time, Fall Time, Delay A→B↑, Delay A→B↓, +Width, -Width, +Duty, -Duty Waveform Math ＋, －, ×, ÷, FFT Lissajou’s Figure Bandwidth full bandwidth Phase Difference ±3 degrees Communication Interface USB 1.1 USB 2.0, LAN (optional) Multi-function Interface Signal Type synchronized input / output, Pass / Fail , external trigger input Level Standard TTL Power Supply 5.0V/1A Power Consumption ≤1.5W ≤5W Dimensions (W × H × D) 170 × 120 × 18 (mm) 190 × 120 × 18 (mm) Weight (without package) About 0.26 kg - See more at: http://www.owon.com.hk/products_info.asp?ProID=175#sthash.bFv4ruQo.dpu
Model VDS1022I VDS1022 VDS2062 VDS2064 VDS3102 VDS3104 Bandwidth 25MHz 60MHZ 100MHZ Channel 2+1 (multi) 4+1 (multi) 2+1 (multi) 4+1 (multi) Sample Rate 100MS/s 500MSa/s 1GSa/s Horizontal Scale (s/div) 5ns/div～100s/div, step by 1～2～5 2ns/div~100s/div, step by 1～2～5 Rise Time ≤14ns ≤5.8 ns ≤3.5 ns Record Length 5K 10M 5M 10M 5M Input Coupling DC AC GND Input Impedance 1MΩ±2%，in parallel with10pF±5pF Channels Isolation 50Hz : 100 : 1, 10MHz : 40 : 1 Max Input Voltage 400V (PK - PK) (DC+AC, PK - PK) 40V (PK - PK) (DC+AC, PK - PK) DC Gain Accuracy ±3% DC Accuracy Average≥16: ±(3% reading + 0.05div) for △T Probe Attenuation Factor 1X, 10X, 100X, 1000X LF Respond (AC, -3dB) ≥5Hz (at input, AC coupling, -3dB) Sampling Rate / Relay Time Accuracy 150ps Interpolation sin(x) / x Interval (△T) Accuracy (full bandwidth) Single: ± (1 interval time + 100ppm × reading + 0.6ns),
Average >16: ±(1 interval time + 100ppm × reading + 0.4ns) Vertical Resolution (A/D) 8 bits resolution (2 channels simultaneously) Vertical Sensitivity 5mV/div～5V/div Trigger Type Edge, Pulse, Video, Slope, Alternate Trigger Mode Auto, Normal, Single Trigger Level ±5 divisions from screen center Acquisition Mode Sample, Peak Detect, and Average Line / Field Frequency (video) NTSC, PAL, and SECAM standard Cursor Measurement △V, and △T between cursors Automatic Measurement Vpp, Vavg, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot,
Rise Time, Fall Time, Delay A→B↑, Delay A→B↓, +Width, -Width, +Duty, -Duty Waveform Math ＋, －, ×, ÷, FFT Lissajou’s Figure Bandwidth full bandwidth Phase Difference ±3 degrees Communication Interface USB 1.1 USB 2.0, LAN (optional) Multi-function Interface Signal Type synchronized input / output, Pass / Fail , external trigger input Level Standard TTL Power Supply 5.0V/1A Power Consumption ≤1.5W ≤5W Dimensions (W × H × D) 170 × 120 × 18 (mm) 190 × 120 × 18 (mm) Weight (without package) About 0.26 kg - See more at: http://www.owon.com.hk/products_info.asp?ProID=175#sthash.bFv4ruQo.dpuf
| Model |
VDS1022I |
VDS1022 |
VDS2062 |
VDS2064 |
VDS3102 |
VDS3104 |
| Bandwidth |
25MHz |
60MHZ |
100MHZ |
| Channel |
2+1 (multi) |
4+1 (multi) |
2+1 (multi) |
4+1 (multi) |
| Sample Rate |
100MS/s |
500MSa/s |
1GSa/s |
| Horizontal Scale (s/div) |
5ns/div～100s/div, step by 1～2～5 |
2ns/div~100s/div, step by 1～2～5 |
| Rise Time |
≤14ns |
≤5.8 ns |
≤3.5 ns |
| Record Length |
5K |
10M |
5M |
10M |
5M |
| Input Coupling |
DC AC GND |
| Input Impedance |
1MΩ±2%，in parallel with10pF±5pF |
| Channels Isolation |
50Hz : 100 : 1, 10MHz : 40 : 1 |
| Max Input Voltage |
400V (PK - PK) (DC+AC, PK - PK) |
40V (PK - PK) (DC+AC, PK - PK) |
| DC Gain Accuracy |
±3% |
| DC Accuracy |
Average≥16: ±(3% reading + 0.05div) for △T |
| Probe Attenuation Factor |
1X, 10X, 100X, 1000X |
| LF Respond (AC, -3dB) |
≥5Hz (at input, AC coupling, -3dB) |
| Sampling Rate / Relay Time Accuracy |
150ps |
| Interpolation |
sin(x) / x |
| Interval (△T) Accuracy (full bandwidth) |
Single: ± (1 interval time + 100ppm × reading + 0.6ns),
Average >16: ±(1 interval time + 100ppm × reading + 0.4ns) |
| Vertical Resolution (A/D) |
8 bits resolution (2 channels simultaneously) |
| Vertical Sensitivity |
5mV/div～5V/div |
| Trigger Type |
Edge, Pulse, Video, Slope, Alternate |
| Trigger Mode |
Auto, Normal, Single |
| Trigger Level |
±5 divisions from screen center |
| Acquisition Mode |
Sample, Peak Detect, and Average |
| Line / Field Frequency (video) |
NTSC, PAL, and SECAM standard |
| Cursor Measurement |
△V, and △T between cursors |
| Automatic Measurement |
Vpp, Vavg, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot,
Rise Time, Fall Time, Delay A→B↑, Delay A→B↓, +Width, -Width, +Duty, -Duty |
| Waveform Math |
＋, －, ×, ÷, FFT |
| Lissajou’s Figure |
Bandwidth |
full bandwidth |
| Phase Difference |
±3 degrees |
| Communication Interface |
USB 1.1 |
USB 2.0, LAN (optional) |
| Multi-function Interface |
Signal Type |
synchronized input / output, Pass / Fail , external trigger input |
| Level Standard |
TTL |
| Power Supply |
5.0V/1A |
| Power Consumption |
≤1.5W |
≤5W |
| Dimensions (W × H × D) |
170 × 120 × 18 (mm) |
190 × 120 × 18 (mm) |
| Weight (without package) |
About 0.26 kg |
About 0.30 kg |
