Máy phát điện áp xung cho thiết bị gia dụng IEC 60950-1 Sinuo SN1104-3 (AC220V, 10kV)

Điện áp đầu ra: 10kV (Tối đa) ±5％

Điện cực đầu ra: cực âm hoặc dương

Trở kháng đầu vào: 1KΩ,±10％

Tụ điện lưu trữ: 1000PF

Điện trở sạc: 15MΩ

Chế độ tác động: Tự động hoặc thủ công

Chu kỳ tác động: 1-9999

Khoảng thời gian tác động: 3-999 giây (3 giây trong số đó là thời gian sạc vốn có của thiết bị)

Môi trường hoạt động: Nhiệt độ: 15℃ -35℃, độ ẩm tương đối: 10% -75%

Nguồn điện: AC220±10％, 50/60Hz

Kích thước: 470mm×260mm×500mm

Trọng lượng: 30kg

Product Information:

This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause 10.2, 13.3.4 a).

7-inch touch LCD interface, rich in functions, easy to operate, easy to upgrade software

Intelligent programmable high voltage power supply, built-in high voltage over voltage, over current and short circuit protection

Output intelligent detection, voltage error, no output warning

Features:

A surge test generator, also known as a surge generator or surge immunity tester, is a specialized piece of equipment used to simulate electrical surges or transients for testing the immunity of electronic devices and systems. It is commonly used in industries such as telecommunications, power systems, automotive, and electronics manufacturing to evaluate the resilience of equipment against voltage spikes and transients that can occur in real-world scenarios.

Here are some key features and functionalities of a surge test generator:

Voltage Generation: The surge test generator is capable of generating high-voltage surges or transients that simulate the electrical disturbances encountered in practical situations. It can produce specific waveforms, such as single impulses, repetitive impulses, or oscillatory waves, with defined voltage levels, rise times, durations, and repetition rates.

Surge Parameters: The generator allows the user to configure various surge parameters according to the testing requirements. These parameters may include peak voltage, voltage waveshape, energy content, polarity, and repetition rate. Different industry standards, define specific surge test parameters for different applications.

Test Modes: The surge test generator typically offers different test modes to replicate different types of electrical disturbances. This may include common mode (line-to-ground) and differential mode (line-to-line) surges, capacitive coupling, inductive coupling, or combinations of these modes.

Control and Monitoring: The generator provides control interfaces and monitoring capabilities to adjust and monitor the surge parameters during the test. It may include features such as a user-friendly interface, digital displays, and real-time monitoring of voltage waveforms and peak values.

Safety Features: Surge generators are designed with safety features to protect both the equipment under test and the operator. This can include overload protection, short-circuit protection, grounding mechanisms, interlock systems, and safety interlocks to ensure safe and reliable operation.

Compliance with Standards: Surge test generators are designed to comply with relevant international standards and specifications, such as those defined by the International Electrotechnical Commission (IEC) or other regional standards organizations. Compliance ensures that the surge tests are conducted according to standardized procedures, allowing for reliable and repeatable results.

When conducting surge tests, the surge test generator is connected to the device or system being tested through appropriate coupling methods. The generator then applies the desired surge waveform to the device, simulating the electrical disturbances it may encounter in its operational environment. The device's response to the surges is observed and assessed to ensure its immunity to transient disturbances.

It's important to note that the specific capabilities and features of surge test generators may vary depending on the manufacturer, model, and intended application. Therefore, it's essential to consult the generator's user manual and relevant standards to ensure proper setup, operation, and interpretation of test results.