Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Cường độ huỳnh quang
Phạm vi đo: 0...2,000 RFU (Đơn vị huỳnh quang tương đối)
Độ lệch đo tối đa: 0.5% phạm vi đo
Độ phân giải: 0.1 RFU
Cảm biến
Kích thích: 365 nm, tối đa 150 mW
Phát hiện: 460 nm
Điểm đo: D=1 mm
Khoảng cách đo: 4.7 mm
Độ sạch
Phạm vi đo: 0...100 %
Độ phân giải: 0.1 %
Độ dày lớp
Phạm vi đo: do người dùng xác định
Nguồn điện: Pin Li-Ion
3.6 V/1.950 mAh, tối thiểu 8 giờ hoạt động
Bộ đổi nguồn điện / USB: 100...240 V / 5 V
Công suất tiêu thụ: tối đa 2.5 W
Dữ liệu chung
Giao diện USB: Truyền dữ liệu
Màn hình: LCD, có đèn
Hồ sơ đo: 254
Bộ nhớ: 8,000 giá trị đo trên mỗi hồ sơ
Kích thước (CxRxS)
Đầu cảm biến:
Thiết bị cầm tay: 129x82x48 mm
Đầu cảm biến: 95x50x30 mm
Trọng lượng (thiết bị): 530 g
Features:
Mobile and robust device for flexible use at the process and in the laboratory.
Intuitive operation: simple and fast operation at the push of one button.
Device with easy to handle sensor head and display unit enables measurment. with a small contact area as well as different application possibilities.
Check and adjustment with calibration standards.
Applications:
The SITA CleanoSpector is used successfully and worldwide in various applications and industries:
Cleanliness inspection of metal parts after machining
Inspection of functional surfaces after selective cleaning (laser cleaning, ultra-fine plasma cleaning, CO2 snow blasting, …)
Inspection for residues of release agent on aluminum die-cast parts prior to adhesive bonding
Monitoring the cleanliness of metal parts before laser welding
Inspection for filmic contamination on parts in medical- or vacuum technology
Detecting residual agents and encapsulation material on bond pads before bonding
Surface inspection on electrical contacts after stripping of isolation material
Inspection for sufficient layer thickness when applying corrosion protection oils or when applying a primer prior to adhesive bonding
Video