Main Boards Terasic VEEK-MT-C5SoC
Hãng sản xuất: Terasic Model: VEEK-MT-C5SoC - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0345.689.536
SoC Embedded Design Suite Subscription Edition
ARM Development Studio 5 (DS-5™) Altera Edition Toolkit
Hardware-to-software handoff tools
Linux run-time software for application development
SoC hardware libraries for firmware development
Application example
Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
110K LEs, 41509 ALMs
5140 M10K memory blocks
224 18x18 Multiplier
6 FPGA PLLs and 3 HPS PLLs
Configuration Device and USB Blaster Circuit
Active Serial (AS) x1 or x4 configuration (EPCQ256SI16N)
MAX® V CPLD (5M2210ZF256I5N) in a 256-pin FBGA package as the System Controller
Flash fast passive parallel (FPP) configuration
MAX II CPLD (EPM570GM100) as part of the embedded USB-BlasterTM II for use with the Quartus® II Programmer
Memory Devices
One 1,024-Mbyte (MB) HPS DDR3 SDRAM with error correction code (ECC) support
One 1,024-MB FPGA DDR3 SDRAM
One 256-Megabit (Mb) quad serial peripheral interface (QSPI) flash
One 512-Mb CFI flash
One 32-Kb I2C serial electrically erasable PROM (EEPROM)
One Micro SD flash memory card
Switches and Indicators
LEDs and displays
Eight user LEDs
One configuration load LED
One configuration done LED
One error LED
Three configuration select LEDs
Four on-board USB-Blaster II status LEDs
One HSMC interface LED
Two UART data transmit and receive LEDs
One power on LED
One two-line character LCD display
Push buttons
One CPU reset push button
One MAX V reset push button
One program select push button
One program configuration push button
Six general user push buttons
DIP switches
One MAX V CPLD System Controller control switch
One JTAG chain control DIP switch
One mode select DIP switch
One general user DIP switch
On-board Clocking Circuitry
Si570, Si571, and Si5338 programmable oscillators
25-MHz, 50-MHz,100-MHz, 125-MHz, 148.50-MHz, and 156.25-MHz oscillators
SMA input (LVCMOS)
Communication Ports
One PCI Express x4 Gen1 socket
One universal HSMC port
One USB 2.0 on-the-go (OTG) port
One Gigabit Ethernet port
Dual 10/100 Ethernet ports
One SDI port (option for SMA connection)
One controller area network (CAN) port
One RS-232 UART (through the mini-USB port)
One real-time clock
Power
14–20-V (laptop) DC input
Capacitive LCD Touch Screen
Equipped with an 7-inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) module
Module composed of LED backlight
Support 24-bit parallel RGB interface
Converting the X/Y coordination of touch point to its corresponding digital data via the Touch controller
5-Megapixel Digital Image Sensor
Superior low-light performance
High frame rate
Global reset release, which starts the exposure of all rows simultaneously
Bulb exposure mode, for arbitrary exposure times
Snapshot-mode to take frames on demand
Horizontal and vertical mirror image
Column and row skip modes to reduce image size without reducing field-of-view
Column and row binning modes to improve image quality when resizing
Simple two-wire serial interface
Programmable controls: gain, frame rate, frame size, exposure
Digital Accelerometer
Up to 13-bit resolution at +/- 16g
SPI (3- and 4-wire) digital interface
Flexible interrupts modes
Ambient Light Sensor
Approximates human-eye response
Precise luminance measurement under diverse lighting conditions
Programmable interrupt function with user-defined upper and lower threshold settings
16-bit digital output with I2C fast-mode at 400 kHz
Programmable analog gain and integration time
50/60-Hz lighting ripple rejection
The Video and Embedded Evaluation Kit - Multi-touch on Cyclone® V SoC Development Board (VEEK-MT-C5SoC) is a comprehensive design environment with everything embedded developers need to create processing-based systems. VEEK-MT-C5SoC delivers an integrated platform that includes hardware, design tools, intellectual property (IP) and reference designs for developing embedded software and hardware platform in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT-C5SoC features the Altera Cyclone® V SoC development board targeting the Altera Cyclone® V SX SoC FPGA, as well as a capacitive LCD multimedia color touch panel which natively supports multi-touch gestures. A 5-megapixel digital image sensor, ambient light sensor, and 3-axis accelerometer make up the rich feature-set.
The all-in-one embedded solution offered on the VEEK-MT-C5SoC, in combination of the LCD touch panel and digital image module, provides embedded developers the ideal platform for multimedia applications with unparallel processing performance. Developers can benefit from the use of FPGA-based embedded processing system such as mitigating design risk and obsolescence, design reuse, reducing bill of material (BOM) costs by integrating powerful graphics engines within the FPGA, and lower cost.
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch